User Manual

-----------------------------------------------19 ----------------------------------------------
4. While seng the delay, choose and play a song that has very
strong vocals and limited instruments. Talk radio is a great source
because you can really ‘visualize’ the voice moving as you adjust
the delay. This will make it much easier to move the image from
down at your le knee where it currently exists, up to the center
of the dash where it needs to be.
5. Le/RightDelay: Push the ACR-3 knob unl its blue LED is
blinking and the red LED is on solid (this is the Le/Right delay
mode). With the source material playing, slowly turn the ACR-3
knob counter clockwise. Each detent in the remote represents
an amount of me (in milliseconds) that you are delaying the
Le front speaker. We have added a small Mute Click along with
the detent on the remote to help you determine your amount
of delay. If you think you have gone too far, just turn the knob all
the way clockwise to start back at zero and slowly turn counter
clockwise unl you reach your desired result.
6. Front/SubwooferDelay: Once the Le/Right delay has been
adjusted, push the ACR-3 knob unl its blue LED is blinking but
the red LED is o (this is the front/sub delay mode). With the
source material sll playing, slowly turn the ACR-3 knob counter
clockwise to add delay to both of the front speakers. You will
noce with each Mute Click of the remote, the sub will move
forward toward the driver. If you think you have gone too far or
missed that ‘sweet spot,’ just turn the knob all the way clockwise
and repeat the process.
Once you have everything where you want, it you are done! Easy right?
Now just go back to the Signal Delay knob on the DQDX and turn it
back to Normal mode (its blue LED will come on) and you are ready to
move to the next step of set-up.