Brochure

HOME AUDIO
NETWORK DSP & DSP MATRIX AMPLIFIERS
The Director
®
Channels
Power Rating
(all channels
driven)
Bridged
8Ω
Minimum
Speaker
Load
Network
Control
Inputs
Pass-thru &
Bus Outputs
Rack
Size
Local Bus/Aux
MODEL D4600
16
100W @ 8Ω
200W @ 4Ω
400W 4Ω DSP 8x Stereo 2x Stereo 9x Stereo 2U
MODEL D2800
8
100W @ 8Ω
200W @ 4Ω
400W 4Ω DSP 4x Stereo
1x Digital
2x Stereo
5x Stereo 1U
All DIRECTOR
®
Amplifiers feature LightDrive
™
Anti Clipping Protection Rack mounts included on all DIRECTOR models
The Director
®
Channels
Power Rating
(all channels
driven)
Bridged
8Ω
Minimum
Speaker
Load
Network
Control
Inputs
Pass-thru &
Bus Outputs
Rack
Size
Local Bus/Aux
MODEL M6800
16
100W @ 8Ω
200W @ 4Ω
400W 4Ω DSP/Matrix 8x Stereo
2x Coax Digital
2x Toslink
8x Stereo
2x Digital
2U
MODEL M6400
16
65W @ 8Ω
100W @ 4Ω
400W 4Ω DSP/Matrix 8x Stereo
2x Coax Digital
2x Toslink
8x Stereo
2x Digital
2U
MODEL M4800
8
100W @ 8Ω
200W @ 4Ω
400W 4Ω DSP/Matrix 4x Stereo
4x Coax Digital
4x Toslink
2x Digital 1U
MODEL M4840
8
100W @ 8Ω
200W @ 4Ω
400W 4Ω DSP/Matrix 4x Stereo
4x Coax Digital
4x Toslink
4x Stereo
4x Digital
2U
All DIRECTOR
®
Amplifiers feature LightDrive
™
Anti Clipping Protection Rack mounts included on all DIRECTOR models
THE DIRECTOR MODEL M6800 | 16 CHANNELS | 100W PER CHANNEL THE DIRECTOR MODEL M4800 | 8 CHANNELS | 100W PER CHANNEL
SUBWOOFER AMPLIFIERS
The Director amplifiers are some of the most intelligent, flexible amplifiers available for residential or commercial applications. Each amplifier features on board digital signal
processing, graphic and parametric EQ by zone, built-in speaker profiles, network monitoring, volume control and zone/channel grouping. The matrixing capabilities of The
Director M-Series allow any analog or digital input to be routed to any zone output, plus two coax S/PDIF outputs. All Director amplifiers feature built-in speaker profiles from
members of AudioControl’s Sound Partners™ program, offering DSP optimized speaker calibrations from a growing list of prominent loudspeaker manufacturers.
THE DIRECTOR MODEL D4600 | 16 CHANNELS | 100W PER CHANNEL THE DIRECTOR MODEL D2800 | 8 CHANNELS | 100W PER CHANNEL
MODEL
Power Rating
(8Ω / 4Ω)
Minimum
Speaker
Load
DSP
Freq.
Response
S/N Ratio THD Inputs
Loop
Outputs
Rack
Size
RS 1000
1000 W 2Ω
Graphic EQ, Parametric
EQ, Crossover,
Phase Conrol, Delay
10 Hz - 20
kHz
>98 dB,
A-Wtd, Ref.
Half Output
0.1%
1 XLR, 1 LFE,
2 RCA,
1 Speaker Level
1 XLR
1LFE
2 RCA
2U
RS 500
500 W 2Ω
Graphic EQ, Parametric
EQ, Crossover,
Phase Conrol, Delay
10 Hz - 20
kHz
>98 dB,
A-Wtd, Ref.
Half Output
0.1%
1 XLR, 1 LFE,
2 RCA,
1 Speaker Level
1 XLR
1LFE
2 RCA
1U
RACK MOUNTS
RACK MOUNTS SOLD SEPARATELY AND DO NOT COME STANDARD
RS 1000 | DSP CONTROLLED SUBWOOFER AMPLIFIER RS 500 | DSP CONTROLLED SUBWOOFER AMPLIFIER
The AudioControl RS 1000 and RS 500 DSP controlled subwoofer amplifiers are the ultimate bass amplification solution for any home cinema, multi-zone audio or 2-channel music system. RS
Series amplifiers deliver high power and are stable into 2 ohm subwoofers. Like other models in the AudioControl lineup, RS Series amplifiers offer IP and IR control, as well as loop outputs with
an optional high-pass filter. These features, coupled with the power of AudioControl’s multi-award-winning DSP engine that puts graphic and parametric EQs, crossover, delay and phase control
at your fingertips for precise calibration and tuning, make the RS Series amplifiers a definitive choice to power any subwoofer in entertainment systems that demand the very best.