Installation manual

Page 20 SIMPLEX 4100 EWIS
OPERATOR MANUAL
Document No.: 4100-M010A May 1999 Issue 3.1
5.7 ALL CIRCUITS PA (TALK) TEST
Push the ALL CIRCUIT PA switch momentary UP or DOWN.
The associated Green LED is should be switched ON.
All the PA speaker circuits are activated.
Perform a test announcement. The announcement should be an output on all
speaker circuits.
To cancel, push the associated momentary switch in the UP or DOWN position.
5.8 SELECTIVE CIRCUITS PA (TALK) TEST
Push the switch momentary UP or DOWN for the selected zone.
The associated Green LED is should be switched ON.
The PA speaker circuits are activated, for the selected zone.
Perform a test announcement. The announcement should be an output on all
speaker circuits, for the selected zone.
To cancel, push the associated momentary switch in the UP or DOWN position.