Owner's Manual

®
Owner’s Enjoyment Manual
6
7. Source: The source button lets you pick between the
MAIN differentially balanced input and the active Auxiliary
input
signals from the main source unit/head unit and attach to
the RCA jacks. Auxiliary inputs will plug into the 1/8” jack
on the back panel input for permanent connection or into
the front panel jack for temporary use. Connecting the Front
and Rear panel Aux inputs at the same time will cause no
damage to the units, but it may create a tear in the time space
continuum. Actually when you plug into the front input the
THREE.2 will automatically shut off the rear panel input
9. Output Jacks: Next to the inputs are the outputs,
which should be connected to the front, rear and subwoofer
amplifiers, if applicable.
10. Power Connections: This nifty connector is a bless-
ing to anyone who has tried to wire up their gear with their
head crammed under the dash. You can wire up the power,
ground, remote turn-on, and illumination from the conve -
nience of the drivers seat and then casually plug it in the back
of your THREE.2.
11. Balanced Input Selector: Located under the cover
and between the Input connectors are jumpers that allow you
utilize or bypass the balanced input circuitry. Although it is
8. Input Jacks: The THREE.2 has three sets of inputs,
MAIN plus two Auxiliaries. MAIN inputs should get their
Figure 3: Top View of THREE.2, with a peek at what's inside
10
89
11
12
13
14
15
GROUND ISOLATION
Ground
Isolated
200Ω
ILLUMINATION
Blue
Red
INPUT SELECTOR
Unbalanced
Balanced