(:~ audioengine ONE Premium Wireless Speaker System A® U Qualcomm ~ aptXW ('al Quickstart Guide
Welcome to the Audioengine family and congratulations on your purchase of the Audioengine Al Wireless Music System! Audioengine is dedicated to bringing you the highest-quality listening experience possible and the Audioengine Al wireless speakers were designed with the same attention to detail and operational simplicity as all our other products. We wish to sincerely thank our customers and the entire Audioengine team for the inspiration to create yet another great product.
Safety Instructions 1. Please read these instructions before using this product. 2. Keep these instructions for future reference. 3. Heed off warnings on the product and in this guide. 4. Follow all instructions. 5. Do not use this apparatus near water or moisture. 6. Clean only with a dry cloth and as directed by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Quick setup 0 0 e Connect the included speaker wire from the Al left (powered) speaker to the right (passive) speaker, observing proper wire polarity to each speaker connector. Verify that the volume/power knob on the rear panel of the left speaker is in the OFF position by rotating the knob until it clicks off. Connect the AC power cable to the Al left speaker rear panel and plug the other end of the cable into a functioning power outlet.
Wired connection D Connect an audio cable between your device and the input on the Al rear panel. El Play music and adjust the volume on the speakers and your device to your desired listening levels. Inputs and volume settings Multiple devices may be connected to the speakers at the same time and the wireless and aux inputs are open and active, so it's easy to switch between your phone, tablet, computer, TV, etc.
Break-in period Your speakers will sound great out of the box and will get better over time. No need to do anything else but listen to them, however, we do recommend that you give them at least 40 to 50 hours break-in time before doing any critical listening. Cleaning We don't recommend using any solvents or cleaners. Just wipe down the cabinets with a soft, dry cloth .
Speaker placement Although Audioengine speakers are very forgiving with regards to where you place them, it's true that proper speaker location can have an impact on sound quality. Even though there are different theories on correct speaker placement, rooms and tastes are different so it's difficult to recommend a perfect setup. We do suggest you feel free to experiment to see what works for you.
Al powered (left) speaker - rear panel (:, audioengine audio input - - - - - - : subwoofer output 0° u Volume/ P o w er--- Pair --+---+-•- - Subwoofer (±) speaker wire connection to passive speaker ~ ~ Input ------•= {~J Quale:;:~ Out to right speaker 0 Ci (J) o volume control power on/off : - + - - - - Bluetooth pair 0 0 Designed by Audioengine Assembled in China Model: A1 FCC ID: PIBB10 [g] 100-240V -_ -----~50/60Hz 1.SA _.
Al passive (right) speaker - rear panel 0 0 speaker wire -----.......
Warranty information All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. The Limited Warranty applies only to Audioengine products purchased in the United States. Your warranty is automatic, so there is no need to register. For Limited Warranty coverage elsewhere, please contact the Audioengine dealer, reseller, or distributor in your country or region. What is covered All defective parts or faulty workmanship.
How to obtain Audioengine warranty service If you have any questions or feel you may need service, contact the reseller where you purchased your product. You can also visit our support portal at support.audioengineusa.com where you will find a searchable Knowledge Base. And if you don't find an answer to your question you can easily contact us by opening a support ticket. We will do everything we can to answer your questions and resolve any issues as quickly as possible.
FCC Part 15 Notice This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Information for Users on Disposal of Old Equipment [European Union] - This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation.
[ Audioengine W3 Wireless Audio Adapter ] [ Audioengine D2 24-bit Wireless DAC ] Play all your music wirelessly from any audio device or computer to your Audioengine powered speakers, stereo receiver, or powered subwoofer. W3 provides CD-quality HD stereo sound with no reduction in audio quality. The D2 24-bit Wireless digital-to-analog converter allows you to stream wireless HD audio from your computer to any music system, independent of your Wi -Fi network.
[ Audioengine 2+ Powered Desktop Speakers ) [ Audioengine S+ Powered Speakers ) The award-winning Audioengine 2 speakers just got better. With a built-in digital-to-analog converter (DAC), the Audioengine 2+ allows you to send high-quality digital audio direct from your computer's USB port. The AS+ delivers audiophile-quality sound and features at a price that continues to set the standard for affordable high -quality audio.
