Owner's Manual
Quick
setup
0 Connect the included speaker wire from the
Al
left (powered)
speaker to the right (passive) speaker, observing proper wire
polarity
to
each speaker connector.
0 Verify
that
the
volume/power
knob on the rear panel
of
the left
speaker
is
in the
OFF
position by rotating the knob until
it
clicks
off.
e Connect the
AC
power cable
to
the
Al
left speaker rear panel and
plug the other end
of
the cable into a functioning power outlet.
D
El
e
II
D
Wireless
connection
Turn power on via the rear panel
volume/power
knob.
Al
will automatically go into Bluetooth "pair mode" and the Pair
button on the rear panel will start flashing.
On
your device (phone, tablet, computer, etc) turn on Bluetooth
and go
to
Bluetooth preferences.
Select "Audioengine
ONE"
to
pair and connect. The Pair indicator
light on the
Al
rear panel should now
be
on solid.
Play your music and adjust volume levels for
Al
and your device.
To
add additional devices
put
Al
back into pair mode by
disconecting
Al
from your device or by pressing the Pair button
on the
Al
rear panel for
about
3 seconds until the pair indicator
light starts flashing. Repeat steps
2 & 3
to
connect another device.
Al
wirelessly connects
to
one device at a time, however
it
will pair
and remember up
to
six
different devices.