- - -
Contents Safety Information ... Page 1 Basic Information.
Basic Safety Instructions • Read these instructions for all components before using this product. • Keep these instructions for future reference. • Heed all warnings on the product and in the owner's gUide. • Follow all instructions. • Do not use this apparatus near water or moisture. Do not use this product near abathtub, washbowl, kitchen sink, laundry tub, in awet basement, near aswimming pool, or anywhere else that water or moisture are present.
Introduction Welcome to the Audioengine family and congratulations on your purchase! The Audioengine 2 was designed by our in-house development team and built to provide many years of enjoyment. Creating powered multimedia speakers to follow the Audioengine 5 was a challenge but we feel we've managed to duplicate the signature sound of the Audioengine 5's in a smaller package perfectly suited for a desktop or smaller space.
Audioengine 2 Features • 2 audio inputs (RCA and mini-jack) • Built-in power amps (left speaker) • Rear panel volume control • Kevlar woofers for super low end • Silk tweeters for smooth highs • High-quality speaker connectors • Auto-sleep power-saving mode • Hand-built cabinets with multi-coat high-gloss finish • Video-shielded • Cables included LEFT SPEAKER REAR FRONT r "'I e INPUTS A L@ VOLUME ;0 VOLUME R(I) AUDIO IN e e - OUTTO RIGHT SPEAKER OUT 0 RIGH OPOWE~ ACIN - -: f@ CE C ~ ~
Box Contents Included with the speakers: • Power supply • Speaker cable (16AWG), 2 meters (r-J6.5 feet) • %" mini-jack audio cable, 2 meters (-6.
Connecting your system Step 1- Connecting the Speaker Wire - - _ Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the right speaker using the included speaker wire. Be sure to match the gold-colored side of the speaker wire with the RED (+) terminals and the silver-colored side to the BLACK (-) terminals on each speaker. As the Audioengine 5 speaker system is self-powered, do not connect the speaker terminals to the speaker outputs of a stereo receiver.
~a ,;,. Connecting your system (continued) Step 2- Connecting the Power Supply _ Be sure that the volume/power switch on the rear panel is in the OFF position by rotating it counterclockwise until it clicks off. • • Connect the DIN power cable from the power supply to the rear DIN power input connector on the speaker. Note: This connector is "keyed" for proper alignment. Do not use excessive force on the connector. Connect the AC power cable to the other end of the power supply.
Basic Troubleshooting If the LED indicator on the power supply is not illuminated: • Check to see that the AC power cord is securely connected to the power supply and to the AC power outlet. • Check that the AC power outlet is supplying power. If the speakers do not produce sound: • Check that the cable from the power supply is connected to the rear panel, and that the LED indicator on the power supply is illuminated.
Warranty Period All Audioengine products have a3-year Limited Warranty on parts and labor from date of purchase. Your warranty is automatic, so there is no need to register. This Limited Warranty applies to Audioengine products purchased in the Continental United States only. For Limited Warranty coverage elsewhere, please contact your Audioengine dealer or reseller. What is covered All defective parts or faulty workmanship.
Audioengine 2 General Specifications Type: Power output: --"""'""--------------------""""'\ 2.0 powered (active) multimedi;- speaker system 60W peak power total (15W RMS / 30W peak per channel), AES Duallfs" stereo mini-jack and RCA jacks Inputs: 110-240V, SO/60Hz auto-switching Voltages: Dual Class AB monolithic Amplifier type: 2.75" Kevlar woofers, 20mm silk dome tweeters Drivers: >95dB (typical A-weighted) Signa I-to-noise: <0.
e~audioengine Audioengine, Ltd. support@audioengineusa.com www.audioengineusa.
~~audioengine www.audioengineusa.
--ITIJ--+- Audio lnputt===~ USB Power L_--=__--.
._I*1OIN:_ ._- • Front 1*101- Clllllnll • Kevl,,_far_lawond • Sllktweetenfor smooth highs • High-quallty speokercon-. •Auto-sIeep _savtng mode • Hand-finished cabinets . •VIdeo shielded • 3-year WlrTlnty • All cables Induded ._ond.._ .... • _radIoond _ _ .".... •Apple docksIremotes .DlIsldop_Ia-._ ~Jt1 Univef>al Dock and other • flat ponoITVs • Mablephanos and PDAs • CD and 1Mlp..
This is a well-made, solid sounding subwoofer, with the potential for a wireless twist.
~.audioenginew, Audioengine Wl .. . . '... . • •• "Sounded as good as a wired connection." -Macworld AS with AWl Wireless Receiver , Audio Output . .
"One word, exceptional" -Affordable$$Audio _.-. - Connection Examples .... ... ~ OR ~ ))) AW2 Wireless Sender AW2 Wireless Receiver - .... OR iPod touch with Wireless Music Receiver Wireless Music Sender (included) Stereo Receiver II Powered Speakers Boombox IPlld ~, trJdrmIfI; of API* Inc. ~ .. the lJ5.lftd OIlhtr.:oumlfl,. 1IloOP1or hj.1ID"l\ lhM .. tlo
•• "- • • • .. . .- - • .......• - • "The (A2) bass response caused me to look around for the proverbial phantom sub. These little grenades deserve a closer look..." -Enjoy the Music.com .• . • •• • • • • • C!l • ·0 - _. . 0.. • • ,><. 3 Fe CE Co ~ Ot~::. ~~aUdiOengine2 ..
~~audioenginep4 Audioengine P4 '. . ...
