Owner's Manual
Table Of Contents
Connecting your system
Step
1-
Connecting the Speaker Wire
--
_
Connect the
RED
(+) and
BLACK
(-)
terminals from the left speaker to the
corresponding terminals on the right speaker using the included speaker
wire.
Be
sure
to
match the gold-colored side
of
the speaker wire with the
RED
(+) terminals and the silver-colored side
to
the
BLACK
(-)
terminals on
each speaker.
As
the Audioengine 5 speaker system
is
self-powered,
do
not
connect the
speaker terminals
to
the speaker outputs
of
a stereo receiver.
Detailed Procedure:
Use
your
thumb
and finger
to
unscrew the binding post connectors.
Insert each speaker wire
into
the holes on the side
of
binding post
connectors.
Retighten the binding posts
with
your fingers.
The stripped portion
of
the wire should
be
secured firmly in each
connector.
Repeat the procedure
to
connect the other end
of
the speaker wire
to
the
other speaker. Make sure
that
none
of
the speaker wire strands have come
in contact with
an
adjoining terminal.
audioen ine 2 setu uide 5