Owner's Manual
Table Of Contents
~a
,;,.
Connecting your system (continued)
Step
2-
Connecting the Power Supply _
Be
sure
that
the volume/power switch on the rear panel
is
in the
OFF
posi-
tion by rotating
it
counterclockwise until
it
clicks off.
Connect the
DIN
power cable from the power supply
to
the rear
DIN
power
input
connector on
the
speaker. Note: This connector
is
"keyed"
for proper alignment. Do
not
use
excessive force on the connector.
• Connect the
AC
power cable
to
the other end
of
the power supply.
• Connect the
AC
power cable
to
a power outlet.
Verify
that
the
LED
indicator on the power supply
is
illuminated.
Use
only the power supply provided
with
the speakers.
Step
3-
Connecting the Audio Source
-------------
Using the appropriate audio cable (either
%"
mini-jack
or
RCA),
connect the
speaker
to
your audio source (computer, iPod, other
MP3
player, etc.).
%"
mini-jack audio cables are provided
with
your speakers.
Step
4-
Enjoying the sound _
• Turn on the rear panel volume/power knob, and set the volume control
to
an
initial setting
of
about 3 o'clock.
• Turn on your audio source, and adjust
to
your desired listening level.
Two (ludio sources may
be
connected into the speakers at the same time.
We
recommend using the volume control on
each
audio source
to
adjust the
overall volume.
We
also recommend using a high-quality surge suppressor and/or
AC
line
filter on all electronics equipment.
6 audioengine 2 setup guide