eminu Setup Guide Premium Powered Desktop Speakers
Contents A2+ setup guide Introduction Page 3 Unpacking Page 3 What’s in the box Page 4 Cleaning Page 4 Placement Page 5 Features Page 5 Setup and Operation Page 6 Basic Troubleshooting Page 11 Warranty Page 13 Specifications Page 15 About Audioengine Page 16 Support Page 16 1
Basic Safety Instructions • Read these instructions for all components before using this product. • Keep these instructions for future reference. • Heed all warnings on the product and in the owner’s guide Follow all instructions. • Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.
Whats in the box Placement • (1) • (1) • (1) • (1) • (1) • (1) • (1) • (2) • (1) • (1) • (1) • (1) Place your Audioengine 2+ speakers at a comfortable listening location with no obstructions at the front or back. If you find that raising them to an angle produces the best sound, this is easily achieved by adding the DS1 Desktop Stands (available separately). A2+ powered (left) speaker A2+ passive (right) speaker Speaker wire, 2 meters (~6.5 feet) Power supply Power cord Mini-jack audio cable, 1.
Setup and Operation As the A2+ speakers have the power amplifiers built inside, do not connect the speaker terminals to the speaker outputs of a stereo receiver. Step 1 - Connecting the speaker wire Step 2 - Connecting the Power Supply Volume Input Input Output R L USB Input Out to Right In from Left Power 17.5V 1.8A Volume Input ➊ V06 Input Output R L USB Input Designed by Audioengine Made in China Out to Right INPUT: 100-240V~ 50/60Hz 1.8A OUTPUT: ±17.5V 2.0A + – Power GND 17.
3. Connect the power cable to an AC power outlet. 4. Verify that the LED indicator on the power supply is illuminated. Another option for connecting a computer to A2+ is via USB audio. Using the included USB cable, connect as shown in the diagram. Use only the power supply provided with the speakers. Step 3 - Connecting an Audio Source Using the appropriate audio cable, connect the speaker inputs to your audio source (computer, iPhone, iPad, etc.). One example is shown in the diagram.
Step 4 - Enjoying your Speakers 1. Turn on the rear panel volume/power knob and set the volume control to about 3 o’clock. 2. Turn on your audio source and adjust the volume to your desired listening level. Two audio sources may be connected to the speakers at the same time. To adjust the volume, we recommend using the individual volume controls on each source. We recommend using a high-quality surge suppressor and/or AC line filter on all electronics equipment.
properly connected. Warranty If the sound is distorted: - Decrease the volume of the input audio source and increase the volume of the speakers. Period All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. Your warranty is automatic, so there is no need to register. This Limited Warranty applies only to Audioengine products purchased in the Continental United States.
so please pack well and make sure to insure your shipment. General Specifications How to obtain Audioengine Warranty service If you have any questions about your warranty coverage or you think you may need service, email the Audioengine Authorized Service Center at: support@audioengineusa.com or call toll-free in the United States at: (877) 853-4447. We will do everything we can to answer your questions and resolve any issues as quickly as possible. Type: 2.
About Audioengine Audioengine designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Audioengine is all about. We sincerely hope you get as much enjoyment from our products as we’ve had creating them! For information about our other products go to: www.audioengineusa.
support@audioengineusa.com audioengineusa.com © 2006-2013 Audioengine Ltd. All Rights Reserved. Copyright Notice Audioengine and Audioengine A2+ are trademarks of Audioengine Ltd.