Owner's Manual

Table Of Contents

audioengine A5+ setup guide

Other Features

Variable Output

The A5+ includes a variable preamp audio output so you can connect

a subwoofer, other Audioengine powered speakers, or an Audioen-

gine wireless adapter to daisy-chain music to other systems around

the house. This output is variable (adjustable) so the volume level

can be controlled from the A5+ front panel or remote control.

USB Power

The USB port allows you to power and charge your iDevice (iPod,

iPhone, iPad, etc.), Audioengine wireless adapters, or any USB-

powered product through the USB connector on the rear panel.

Note that this is for power only, not USB audio or data transfer.

Stand Mounting

Threaded 1/4"-20 brass inserts are included on the bottom of each

speaker cabinet to provide the ability to attach the speakers to free-

standing oor stands. These inserts, however, are not designed to

support the full weight of the speakers and therefore should not be

used with single-point wall or ceiling mounts.

Important Safety Note: It is the customer’s responsibility to check

with the stand manufacturer to determine whether that specic

stand is capable of handling the weight and proportions of these

speakers in a safe and stable manner. The customer is also respon-

sible for proper selection of mounting hardware not included with

the speaker and for proper assembly. Audioengine disclaims any

liability for the selection of suitable oor stands and/or correct hard-

ware between the selected stand and these speakers.

For a complete list of product features and specications, go to: