Owner's Manual

4
1
2
3
5
5
Setup
Download the free Audioengine app from the Apple App Store for iOS or
from Google Play for Android. This is what you need to set up and
configure your B-Fi.
No need to install or open this app yet as we first need to connect B-Fi to
your music system.
Connecting B-Fi to your music system
Connect the included RCA audio cable (or TOSLINK digital optical cable)
between B-Fi and your music system or powered speakers.
Connect the included power cable between the power supply and B-Fi,
then plug the power supply into a functioning power outlet.
Turn on your music system and set the volume level so you can hear the
voice and audio prompts during setup.
The B-Fi Status button will blink rapidly for 15 seconds, then a piano tone
will play through your music system.
The B-Fi Status button will now blink more slowly and a voice will say:
“Entering setup mode. Follow the instructions in the app to finish the
setup.”
If no piano tone or voice is heard aer 15 seconds, check your music
system volume level.
B-Fi will remain in setup mode (slow-blinking Status button) for 5 minutes
before timing-out.
To go back into setup mode, press and hold the B-Fi Status button for
about 5 seconds until you hear the voice prompt again.
Connecting B-Fi wirelessly to your internet router
As device screens seem to constantly change with updates and not all
Android menus are identical, the easiest way to get through this setup is to
follow the instructions directly in the app and listen to the voice prompts
through your music system.
6