~' audioengine Audioengine B2 Premium Bluetooth®Speaker Quickstart Guide
Welcome to the Audioengine family and congratulations on your purchase of the Audioengine®B2 Premium Bluetooth Speaker! The Audioengine team is dedicated to bringing you the highest-quality listening experience possible and the B2 was designed with the same attention to detail and operational simplicity as our other products. We wish to thank our customers, distributors, and resellers for all the great feedback and inspiration to create this product.
Safety Instructions 1. Please read these instructions before using this product. 2. Keep these instructions for future reference. 3. Heed all warnings on the product and in this guide. 4. Follow all instructions. 5. Do not use this apparatus near water or moisture. 6. Clean only with a dry cloth and as directed by the manufacturer. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Quick Setup Setup and pairing is really easy. The following instructions will help you connect wirelessly to your B2. D Step 1: Connect the power cable to the 82 rear panel and plug the other end of the power cable into an AC outlet. B Step 2: Turn on 82 with the power switch located on the rear B Step 3: On your device (phone, computer, tablet, etc.), turn on II Step 4: Select "Audioengine B2" to pair and connect. panel.
Ter r Volume 0 r:, Power/Pair 0 0 °""'; audioengine i3 ' Input Serial Number L ~ I. ....) On 100-l40V- W60Hz. 1.SA B2 Rear Panel 3 CD 0 ® © ® Volume control Pair button/power indicator Aux audio input AC power inlet Power on/ off switch ! Off [Eil 5 ~by-- ......,""" ~8:.
Troubleshooting Tips B2 is connected to AC power, but the power indicator on the rear panel does not light up. Check to make sure B2 is plugged into a functioning AC power outlet and that the power switch on the rear panel is in the on position. My phone or other device will not pair with 82. Verify that Bluetooth on your device is turned on and check that the B2 Pair button on the rear panel is blinking (in Pair mode). Also make sure your device is as close to B2 as possible.
Troubleshooting Tips Sound quality is poor and/or audio is cutting out. Move your device closer to B2. Move B2 to another location. Unpair and then re-pair your device to B2. Disconnect power from the B2 and power back on. Check that your device's software and OS are updated to the latest versions. More Info More product information and setup tips can be found on our website: audioengine.
Tech Stuff High-fidelity Bluetooth®with aptX®and extended range Supports all Bluetooth-enabled devices Hand-built wood cabinet with magnetic speaker grill Auxiliary analog mini-jack input Built-in power supply Specifications Type Amplifier type Power output Drivers Inputs Input voltages SNR THD+N Crosstalk Frequency response Supported Bluetooth codecs Wireless operation range Product dimensions Shipping weight 2.
Warranty Information All Audioengine products have a 3-year Limited Warranty on parts and labor from date of purchase. The Limited Warranty applies only to Audioengine products purchased in the United States. Your warranty is automatic, so there is no need to register. For Limited Warranty coverage elsewhere, please contact your Audioengine dealer, reseller, or distributor. What is covered All defective parts or faulty workmanship.
How to obtain Audioengine Warranty service If you have any questions about your warranty coverage or you feel you may need service, email the Audioengine US Service Center: support@audioengineusa.com or call toll-free in the US: (855) 845-5525 We will do everything we can to answer your questions and resolve any issues as quickly as possible.
Information for Users on Disposal of Old Equipment [European Union] - This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling in accordance with your national legislation.
FCC Part 15 Notice (cont'd) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
© 2019 Audioengine. All Rights Reserved. Audioengine and Audioengine B2 are trademarks of Audioengine. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are used by Audioengine under license. The aptX®mark and logos are registered trademarks of CSR pie. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
[ Audioengine W3 Wireless Audio Adapter ] [ Audioengine D2 24-bit Wireless DAC ] Play all your music wirelessly from any audio device or computer to your Audioengine powered speakers, stereo receiver, or powered subwoofer. W3 provides CD-quality HD stereo sound with no reduction in audio quality. The D2 24-bit Wireless digita l-to-ana log converter allows you to stream wireless HD audio from your comp uter to any m usic system, independ ent of your Wi-Fi network.
[ Audioengine 2+ Powered Desktop Speakers ] [ Audioengine s+ Powered Speakers ] The award-winning Audioengine 2 speakers just got better. With a built-in digital-to-analog converter (DAC), the Audioengine 2+ allows you to send high-quality digital audio direct from your computer's USB port. The AS+ delivers audiophile-quality sound and features at a price that continues to set the standard for affordable high-quality audio.