Setup Guide Audioengine, Ltd. support@audioengineusa.com www.audioengineusa.com © 2010 Audioengine Corp. All Rights Reserved. Copyright Notice Audioengine and Audioengine N22 are trademarks of Audioengine Ltd.
Contents Safety Instructions audioengine N22 setup guide Page 1 Introduction Page 2 Features Page 2 What’s in the Box Page 3 Unpacking Page 3 Setup and Operation Page 4 Cleaning Page 8 Troubleshooting Page 8 Warranty Information Page 10 Contact Us Page 11 audioengine N22 setup guide
Basic Safety Instructions • • • • • • • • • • • • 1 Read these instructions for all components before using this product. Keep these instructions for future reference. Heed all warnings on the product and in the owner's guide. Follow all instructions. Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture are present.
What’s in the Box • • • • • • • • • • Setup and Operation N22 amplifier with integrated stand RCA Input N22 power supply 3.5 mm Detachable AC power cord Mini-jack Input 1⁄8" audio cable, 2 meters (~6.5 ft) Variable Preamp RCA audio cable, 1 meters (~3.28 ft) Line Out Speaker wire (16AWG), Power 1.75 meters (~5.
Using Bare Wire Step 3 – Connecting the Power Supply Be sure that the volume/power switch on the front panel is in the OFF position by rotating it counterclockwise until you hear a click. Use your thumb and finger to unscrew the binding post connectors on the back of each speaker. Insert each speaker wire into the holes on the side of the binding post connectors, observing proper polarity. Retighten the binding posts with your fingers.
Other Features Headphone Out - For headphone enthusiasts the N22 includes a highperformance, low-noise headphone amplifier which works well with all types of headphones. Even if you don't connect speakers to your N22 the headphone amplifier will make your iPod or computer sound better through headphones. Keep in mind that permanent hearing loss may occur if earbuds or headphones are used at high volume so be sure to set the volume to a safe level.
Hum Adding a new component such as your N22 amplifier can bring out hum or buzz that may not have existed before. Your first assumption may be that something is wrong with the component but this is generally caused by a “ground-loop” in your system. Consider these tips for possible solutions: • • • • • • First try moving all components to the same electrical circuit or AC outlet.
Contact Us If you have any questions or feel you may need service contact the reseller where you purchased your product or feel free to email us directly at: support@audioengineusa.com or call toll-free in the United States: (877) 853-4447 About Audioengine Audioengine designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Audioengine is all about.