6000A Play 6000A Play User Manual
1: Important Safety Information AVIS: RISQUE DE CHDC ELECTRIQUE-NE PAS DUVRIR VVARNING: SHOCK HAZARD-DD NOT OPEN This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside.
2: Contents audiolab 6000A Play GETTING STARTED .....................................................................................................................................................................................................4 CONTROLS AND FUNCTIONS ...................................................................................................................................................................................5 REMOTE HANDSET..............................................
Page 4 3: Getting Started Introduction to Audiolab 6000 Series Outputs: Welcome to the Audiolab 6000A Play, an integrated amplifier with wireless audio streaming, which is the latest member of the acclaimed Audiolab 6000 series of components. Featuring DTS Play-Fi Technology, music can be streamed over your wireless network in high resolution format and can be easily expanded to a multiroom system if required.
Page 5 4: Controls and Functions BODDA Play 00 Power LED Power Switch Fuse Mains Input Source Selector Loudspeaker Output 0 Mode WiFi LED 12V Triggers Volume Display WiFi Setup () a audiolab Headphone Remote Socket Input Standby Button Update Ethernet Port OPT / DIG Input WiFi Antenna Pre Output Analogue Inputs Ground Bluetooth Antenna Device States WiFi LED States(red) Power LED States Dark red Standby Mode Off Initialization Mode Fast flash Fast flash white Standard Sett
5: Remote Handset NOTE : the handset buttons shown crossed out are for use with other Audiolab units like Audiolab 6000CDT and are not operational when used with the 6000A Play 1 STANDBY Press to bring the unit in/out of standby Fitting Batteries 2 VOL+ Increase volume The remote control requires 2 x AAA type batteries.
Page 7 6: Connections Analogue Inputs (Line Level) USB Update Connect your analogue sources to one of the three line level inputs, AUX1, AUX2 or AUX3. Put the update file into USB drive, plug in the UPDATE USB interface, press STANDBY button on the front panel then POWER ON, 6000A Play will upgrade automatically. After the completion, unplug the USB drive and restart the device, now it can be used. Phono Input (MM) Connect your turntable (moving magnet cartridge) to the phono input.
Page 8 7: System Operations - 1 Switching On and Of f Mute Switch on all source units before switching on power to the 6000A Press the VOL knob on the front panel or the MUTE button on the remote handset Play. to mute / un-mute the sound. When switching On: the power LED illuminates. Display Setting When switching Off: switch off the 6000A Play before the source The DISPLAY button on the remote control will toggle the front panel display ON/ units. OFF.
Page 9 7: System Operations - 2 Operating Mode Pre-Power mode Although the 6000A Play is an integrated amplifier it can function as a separate pre and power amplifier. Use the MODE knob on the front panel, or the MODE key on the remote control, to select different operating modes.
Page 10 7: System Operations - 3 The MENU E~U The menu enables you to customize the unit and optimize the interface with other equipment in your system. 6000A Play has 8 different menu pages. Press the MENU key on the remote control to enter menu mode, and then press enter any menu page, press or again to select different settings. or to turn to different menu pages.
8: DTS PLAY-FI® Wireless Streaming Technology Page 11 Key Features DTS Play-Fi puts you in complete control of your music. It gives you the freedom to effortlessly stream via Wi-Fi ® from any device to any speaker in any room in your house. It's never been easier to listen to music with the people you love, in the place you love most. A place where MULTI-SPEAKER DTS Play-Fi is open to all speakers, no matter the size, shape, or brand. It's a truly all-inclusive system.
Page 12 9: Download the APP Download the DTS APP Dow nload the □TS Play-Fi P lay,Fi A PP Network N e t\N'ork Settings S ettings The DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or Wired network setting Connect the Ethernet Port to the LAN port of a wireless router using a suitable cable. After switching on the 6000A Play, the white LED on the front panel and red Wi-Fi LED on the rear panel will fast-flash during the initialize phase ofWi-Fi mode.
Page 13 10: Wi-Fi Connection Using the APP For Andriod ror An d r io d users: usrar s: For Apple ro r Ap p lia iOS i □ S users: usrars: (1) Open the DTS Play-Fi APP, then click the 'Set-up your Play-Fi device' button. (1) Download the Play-Fi APP. Before opening the APP please switch to the Settings - Wi-Fi menu on your smartphone or tablet and select 'PlayFiXDeviceXXXXXX' from the options. (2) When it has found the 6000A Play click the 'Set-Up' button.
11: Wi-Fi Connection Setup Using a Windows PC or Mac Page 14 (6) Select your wireless router Wi-Fi network. For PC or Mac users: If you cannot connect using the DTS Play-Fi APP, or you need to do some high-level option such as setting the static IP configuration, you can setup the Audiolab 6000A Play using a web browser from your Windows PC or a Mac.
Page 15 12.APP Operations - 1 Device Dev ice Selection S e lection Internet intern et Radio Rad io The DTS Play-Fi APP allows you to control and direct streaming music to a variety of Devices throughout your home that use the DTS Play-Fi system. You can set each Device to have a unique name. You can also group Devices into an Area, where each Device will play the same music.
Page 16 13.APP Operations - 2 Media M edia Server S e rver SoundMachine S ound M a c h ine Got a hard drive full of music? Avid digital collectors can access and stream from media servers using DTS Play-Fi. The system automatically discovers and indexes music from DLNA and UPnP servers on your network. You can select and stream files in multiple formats via DTS Play-Fi, including premium tracks encoded at CD quality or even 24-bit/192kHz lossless content. No subscription required.
Page 17 14.APP Operations - 3 Line In lr11 Mode Speakers Group The 6000A Play supports wireless broadcasting of any of your music source inputs to other DTS Play-Fi audio solutions on your network. For instance, you can stream the turntable input from your 6000A Play to other DTS Play-Fi wireless speakers or streamers via the app. Perfect for a multi-room home audio solution.
Page 18 15.APP Operations - 4 Spotify Group Setup □TS Open the Set Up of the DTS Play-Fi app and click the Spotify Group. Create a new group and name for it, then select any Play-Fi products you want to add into this group (on the right side). Any speakers that can't be added to the Spotify Group will show in grey. Any speakers that can't be joined to a Spotify Group will be greyed out. Once you're satisfied, head to the Spotify app to start streaming. With your PC running Windows 7, 8, 8.
Page 19 16.Warranty Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab’s option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.
Page 20 17.Specifications Model BODDA Play DTS Play-Fi® Technology Power Amplifier Section Gain Supports global, popular streaming content (Amazon Rated Max. Power Output Music, Spotify, TIDAL, KKBox, SiriusXM, Napster, Internet Frequency Response Input Sensitivity Total Harmonic Distortion (THD) Signal-to-Noise ratio (SIN) +29dB 2 X SOW (8 ohm, THD<1%) 2 X 75W (4 ohm, THD<1 %) 20Hz-20kHz (+/-0.3dB) 720mV (Volume=0dB) < 0.003% (1 kHz@ 40W/8ohm) > 11 0dB (A-weighted) Max.
Correct disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for - environmental safe recycling.
Audiolab IAG House, 13/14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK Tel: +44(0)1480 452561 Email: service@audiolab.co.uk http://www.audiolab.co.
