Owner's Manual
Table Of Contents
9: Download the APP
Page 12
Download the DTS Play-Fi APP
The
DTS Play-Fi APP can be downloaded from the Google Play Store, Amazon APP Market or
Network Settings
Wired network setting
Wireless Network Setting
You can connect to a wireless network using one of two modes: WPS Mode or Standard Mode.
WPS Mode:
Standard Mode:
device is connected to the wired
Do
w
nload
the
□
TS
P
la
y,
Fi
A
PP
Apple App Store. For Windows
PC
you
can
download the
Play-Fi
Windows
APP
from
the official
website: https://play-fi.com
ANDROID APP ON
Available
on
kindle
fire
For
Windows
PC
N e
t\N'ork
S
ettings
Connect the Ethernet Port
to
the
LAN
port
of
a wireless router using a suitable cable. After
switching on the 6000A
Play,
the white
LED
on the
front
panel and red
Wi-Fi
LED
on the rear
panel will fast-flash during the initialize phase ofWi-Fi mode. The
LED
change
from
white
to
red
on the
front
panel and slow-flash when the network connection.
If
the connection
is
successful, the red
Wi-Fi
LED
will go off,
but
the red
LED
on the
front
panel
stays lit.
W
ireless
Network
Setting
In
order
to
make the 6000A Play enter
WPS
Mode, switch the unit on and press and hold the
Wi-Fi
SET-UP
button on the rear panel
for
4 seconds. The
Wi-Fi
LED
will double-flash and beep
with a warning tone indicating
that
WPS
Mode
is
active. Then briefly press the
WPS
key on
your
wireless router and the unit should connect
to
your
wireless network automatically. This
connection phase may take up
to
60
seconds.
If
the connection fails, please
try
again.
After switching the 6000A Play on, press and hold the
Wi-Fi
SET-UP
button on the rear panel
for
8 seconds. For the first 4 seconds the Wi-Fi
LED
will double-flash and beep with a warning tone
- keep holding the button down and after 8 seconds the
Wi-Fi
LED
will flash quickly and also
beep with a warning tone. The Standard connection mode
is
now
active and the
Wi-Fi
hotspot
will
be
found after
20
seconds. Then the
Wi-Fi
LED
will flash-breathe with a slow fluctuation
between
off
and on (reflected by the white
LED
on the
front
panel).
You
can
now
use
your
Android
or
IOS
device
to
enter the
Wi-Fi
password using the
Play-Fi
APP
as
follows
(see
next
page):