Owner's Manual

11: Wi-Fi Connection Setup Using a Windows PC or Mac
Page 14
For PC or Mac users:
If you cannot connect using the DTS Play-Fi APP, or you need to do some high-level option such
as setting the static IP configuration, you can setup the Audiolab 6000A Play using a web
browser from your Windows PC or a Mac.
Set the 6000A Play to Standard Setup mode, then follow these steps:
(1) Connect your computer to the wireless Wi-Fi of the 6000A Play - it will show as 'PlayFiXDe-
viceXXXXXX' or similar name. After connecting your computer may show 'No Internet Connec-
tion' - this is normal.
(2) Open your Internet Browser and type: 192.168.0.1 /index.html in the address bar.
(3) Click the Enter key or click 'Continue' option in your Internet Browser.
(4) This will open the Play-Fi configuration.
(5) Select the 'Set Up' button.
Settings
Set Up
Select the wireless nelwork l h,s speaker I receiver
should conooct with. If you are connecting to a
secure networlc you w, I1 oeed lhe correct passwo«t.
Se t lJp
Update Fi rmware
Updl:l te Firmware
AirPlay Settings
Name
Se t Passwo rd
•
(6) Select your wireless router Wi-Fi network.
Sel ect Wi- Fi Ne t work Fo r Dev i ce
Loading may take a moment ...
Apple Network 81c9da !Secured)
HakusanWiFi (Secured)
IE : IEEE 802 . 11i/WPA2 Versi on 1 (Not Secured)
I
36u (Secured)
IE : IEEE 802 . 111/WPA2 Versi on 1 (Secured)
HUAWEI P10
(Secured)
Other Network
lid#Mibdl
(7) Enter the password for your wireless network. Then click the 'NEXT' button.
Ent er the Ne tw ork Passwo rd
En t er Password :
I· .. ·--·,
(8) You can then name your 6000A Play Device and click 'NEXT'. The Wi-Fi connection will be made
and you can use the device.