1 : Important Safety Information A AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR WARNING: SHOCK HAZARD-DO NOT OPEN This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no userserviceable parts inside.
2: Getting Started Welcome to Audiolab 6000 Series. Outputs: 6000A is the latest in a long line of Audiolab integrated amplifiers with a pedigree that stretches back to the very first 8000A that made Audiolab an overnight sensation. Pre-Amplifier output. Loudspeaker output. The 6000A features analogue and digital audio circuitry of the highest quality and has been designed by engineers who are passionate about the reproduction of music, and we hope you will enjoy its performance for many years to come .
3: Controls and Connectors __,-----) ( () audiolab SOOOA POWERLED SOURCE SELECTOR MODE VOLUME DISPlAY HEADPHONE SOCKET REMOTE INPUT STANDBY BUTTON '.::: = J-~- ~ -Jr I ~-~:::mi•----. ; ; .; :;: :. r'® , ~ @) i I- \~n,~~~SETIAL21SOV I FUSE ,_ ® = 4. MAINS INPUT ~i 0 ! @I ,J ~ + - -~__J_ • + 1 • ~ - ! ~ i.
4 .. R 8 m t O 8 @ H 8 CD n d S 8 t NOTE: the handset buttons shown crossed out are for use with other Audio/ab units like Audio/ab 6000CDT and are not operational when used with the 6000A 1 STANDBY Press to bring the unit in/out of Standby 2VOL+ Increase Volume Fitting Batteries Open the battery compartment cover, unwrap the MUTE ® D 3 VOL- Decrease Volume ~ ~ ~ 4 DISPLAY Press to toggle the display on/off cover.
5: Connections Analogue Inputs (Line Level) Connect your analogue sources to one of the three line level inputs, AUX1, AUX2 or AUX3. Once paired the front panel SOURCE indicator will be turned on. If you switch to another input on the 6000A your mobile device will be disconnected after 60 sec. To reconnect, select BT on the 6000A and it will connect to the last paired device, or select 'Audiolab 6000A BT' on your mobile device in the Bluetooth menu and it will reconnect.
6: Operation Switching On and Off Mute Switch on all source units before switching on power to the 6000A. Press the VOL knob on the front panel or the MUTE button on the remote handset to mute I un-mute the sound. When switching On: The power LED illuminates. When switching Off: Switch off the 6000A before the source units. Display Setting The DISPLAY button on the remote control will toggle the front panel display ON/OFF.
6: Operation - 2 Operating Modes Pre-Power mode MODE 0 Although the 6000A is an integrated amplifier it can function as a separate Pre and Power amplifier. Use the MODE knob on the front panel, or the MODE key on the Remote control, to select different operating modes. The pre-amplifier section is internally disconnected from the power amplifier. The 6000A can be used as a stand alone power amplifier (ie. part of an AV setup).
B: Operation - 3 The MENU The menu enables you to customize the unit and optimize the interface with other equipment in your system. 6000A has 6 different menu pages.
7: Warranty Audiolab Ltd . warrants this product, subject to the terms and conditions below, to be free 3. Products that were not new at the time of original purchase. from defects in materials and workmanship. During the warranty period Audiolab will repa ir or replace (at Audiolab's option) this product, or any defective part in this product, if it is found to be 4. Products sold 'as is', 'as seen' or 'with all faults'. defective due to faulty materials, workmansh ip or function.
B: Specification Pre-amplifier Section Gain (max.) Input Sensitivity Input Impedance Total Harmonic Distortion (THD) Frequency Response Output Voltage Output Impedance Signa l-to-Noise Ration (SIN) +8dB (Line) +SSdB (Phono MM) 720mV (Line, Volume= 0dB) 3.1 mV (Phono MM, Volume=0dB) 1OK (Line) 471
Audiolab IAG House, 1 3/1 4 Glebe Road, Huntingdon, Cambridgeshire. PE2970L, UK Tel: +44(0)14B0 452561 Fax: +44[0)14B0413403 http://www.audiolab.co.
