Owner's Manual

B: Specification
Pre-amplifier Section
Gain (max.)
Input Sensitivity
Input Impedance
Total
Harmonic Distortion (THD)
Frequency Response
Output Voltage
Output Impedance
Signal-
to -Noise Ration (SIN)
D AC
D to A converter
Total H armonic Distortion (T H D)
Output level (0dBFS, 1 KHz)
Max. Sampling Frequency
Signal-to-noise ratio (S/N)
Digital Filters
Po wer Amplifier Section
Gain
Rated Max. Power Output
Frequency Response
I
nput Sensitivity
Total H
armonic Distortion (T H D)
Signal -t o-Noise ratio (SIN)
Max.
Output Current
+8dB (Line)
+SSdB (Phono MM)
720mV (Line, Volume= 0dB)
3.1 mV (Phono MM, Volume=0dB)
1
OK (Line)
471<//1 00pF (Phono MM)
< 0.0004% (Line, 1 KHz@
2V, Volume= 0dB)
20Hz-20kHz (+/-0.1 dB)
2.3V max. (Volume= 0dB)
120
ohm
> 11 0dB (Line, A-weighted)
>76dB (Phono MM, A-weighted)
ES9018K2M
< 0.0006%
(1 KH z@ 0dBFS)
2.0SV
192KHz
> 112dB (A -weighted)
Fast Roll - off, Slow Roll - off, Minimum Phase
+29dB
2 X
SOW (8 ohm, THD<1 %)
2 X 75W (4 ohm, TH D<1 %)
20Hz-20kHz (+/-0.3dB)
720mV
<0.003%
(1 kH z@ 40W/8ohm)
> 11 0dB (A -weighted)
9A
Headphone Amplifier
Total Harmonic Distortion (THD)
Output Impedance
Load impedance
General
Standby Power Consumption
Power Requirements
Dimensions (mm)
(W x H x D)
Carton Size (mm) (W x H x D)
Weight
< 0.01 %
(1 kHz, S0mW)
2.35
ohm
20-600 ohm
<0.SW
240V - 50 - 60Hz
230V - 50 - 60Hz
11 SV - 50 - 60Hz
1 00V - 50 - 60Hz
445
X 65.5 X 300
512x467x 146
7.8kg (Net)
Correct disposal of th is product. Th is marking indicates that this product should not be disposed
wi th other ho useh old w astes throughout the EU. To prevent p ossi ble harm to the en vironment or
human health from uncontrolled waste dispo sal , recycle it responsibly to promote the su stainable
reuse of material resource s. To return your used device, please use the return and collection
sys tem s or contact the retailer where the product w as purchased. They can take this product for
- environmental safe recycling.