Owner's Manual
2:
Getting
Started
Welcome
to
Audiolab 6000 Series.
6000A
is
the latest
in
a long line
of
Audiolab integrated amplifiers with a pedigree that
stretches back
to
the very first 8000A that made Audiolab
an
overnight sensation.
The 6000A
features
analogue and digital
audio
circuitry
of
the
highest
quality
and has been designed by engineers who are passionate
about
the reproduction
of
music, and we
hope
you will enjoy its
performance
for
many years
to
come.
Please read through this manual
to
obtain
the
very best performance
from
your
6000A.
Features:
Bluetooth aptX
DAC
-
ES9018K2M
Dedicated high performance
MM
Phono Input.
Separate Pre-Power sections for flexibility
of
operation.
Automatic equipment activation
via
12V trigger.
Auto standby function.
Inputs:
Three analogue line
level
inputs.
One Phono input (MM)
One Power-Amp input
Two
Coaxial
SPDIF
digital inputs
Two
Optical
SPDIF
digital inputs
Bluetooth
(aptX)
Outputs:
Pre-Amplifier output.
Loudspeaker output.
Headphone output.
Unpacking
Unpack the product fully.
The
carton should contain:
The
Audiolab 6000A
One
!EC
power cord suitable for your area .
One Remote handset with two
AAA
batteries
This instruction manual.
One Bluetooth Antenna
If
an
item
is
missing or damaged report this to your dealer
as
soon
as
possible.
Retain
the packing for safe transport
of
your unit. If you dispose
of
the packing, do
so
with
regard to any recycling regulation
in
your area.
Placement
The
unit
is
designed
to
run warm during normal operation
but
ensure you do
not
block
any
ventilation openings.
Place
the unit on a sturdy shelf
or
table. If you
use
an
equipment
rack,
ensure the unit
has
adequate ventilation and
is
on its own shelf.
Check your mains voltage corresponds to the rating printed on the rear panel (near
the power inlet socket).
If
in
doubt, consult your dealer. If you move
to
an
area with a different mains voltage
seek advice from
an
Audiolab appointed dealer
or
a competent service technician.
l±Mfd