REPEAT 6000CDT User Instructions
1: Important Safety Information one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
2: Getting Started Welcome to Audiolab 6000 Series. Note: The 6000CDT should be used with the DIGl or OPT outputs connected directly to a preamplifier with inbuilt DAC. 6000CDT is a high performance CD transport that is the perfect partner for other Placement Audiolab components such as 6000A. We hope you will enjoy its performance for many years to come. The unit is designed to run warm during normal operation but ensure you do not block any ventilation openings.
3: Controls and Connectors REPEAT Page 3
4: Remote Handset NOTE : the handset buttons shown crossed out are for use with other Audiolab units likeAudiolab 6000A and are not operational when used with the 6000A Fitting Batteries 1 STANDBY Press to bring the unit in/out of Standby 2 STORE Press to store a track in Program mode 3 Move to the next track of CD 4 Press and hold to Fast Forward 5 Press and hold to Fast Reverse Always use AAA batteries and replace them in sets - never mix old and new batteries.
5: Connections Digital Outputs Coaxial and Optical output Mains Input Before connecting the 6000CDT to the mains supply make sure that all the other connections to your system have been properly and securely made. Make sure the ON/OFF switch on the 6000CDT is switched off. Switch the mains supply off at the wall socket, and then, using the cable supplied, connect the socket on the back of your 6000CDT to an AC supply outlet. The 6000CDT is now ready for operation.
6: Operation Switching On and Off Connect power to all system units. Switch the mains on. Switch on all source units including the 6000CDT. Switch on the power amplifiers. If you go past track 1, the player will wrap round and reverse search from the final track on the When switching off: switch off the amplifier first before switching off the 6000CDT unless they are trigger enabled. Forward and Reverse Search during play When switching on: The power LED illuminates, the display shows the welcome screen.
7: Warranty Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab’s option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.
8: Specification Measurement made with 230V power supply Digital Output Voltage Level 600±50mVpp Frequency response ≤0.01dB @ 20-20kHz Output Impedance 75±1 ohm Max Sampling Rate 44.1 KHz Max. Power Consumption 15W Standby Power Consumption <0.5W Power Requirements 240V ~ 50 - 60Hz 230V ~ 50 - 60Hz 115V ~ 50 - 60Hz 100V ~ 50 - 60Hz Dimensions (mm) (W x H x D) 445 x 300 x 65.5 - including feet, terminals and controls Carton Size (mm) (W x H x D) 512 x 467x 146 Weight 5.
Page 9
Page 10
Audiolab IAG House, 13 /14 Glebe Road, Huntingdon, Cambridgeshire, PE29 7DL, UK Tel: +44(0)1480 452561 Fax: +44(0)1480 413403 http://www.audiolab.co.