audiolab User Instructions 8000M 8000P 8000Q Audiolab IAG House, Sovereign Court, Ermine Business Park, Huntingdon PE29 6XU Tel: 01480 447700 Fax: 01480 431767
8: Warranty Audiolab limited warranty Audiolab Ltd. warrants this product, subject to the terms and conditions below, to be free from defects in materials and workmanship. During the warranty period Audiolab will repair or replace (at Audiolab's option) this product, or any defective part in this product, if it is found to be defective due to faulty materials, workmanship or function. The warranty period may vary from country to country.
1: Statutory & Safety Information CAUTION! RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER -REMOVEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL ADVERTISSEMENT : RISQUE DE CHOC ELECTRIQUENE PAS OUVRIR This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
5: Operation 6: Service Switching On Phase Care & Cleaning Make sure all the signal and loudspeaker connections to and from the amp are secure and correctly made. Plug the power cords into the pre-amplifier and the power amplifier/s and then into the wall socket . Switch on at the mains and then switch on the pre-amlifier followed by the power amplifier/s. The power indicators on all the units will light showing the system is operational.
3a: Connections- 8000Q FUSE HOLDER MAINS INPUT Switch power off when making connections PREAMPLIFIER OUTPUTS VCR TAPE 2 8000Q Connections TAPE 1 CDR,ETC AUX CD, DVD Connecting the 8000Q to the 8000P - Standard Speaker Connection CD, TUNER, AUX, VIDEO IN, TAPE 1 IN, TAPE 2 IN The six inputs may be used for connecting any line level source. VIDEO OUT, TAPE 1 OUT, TAPE 2 OUT Three sets of record outputs for connection of up to three stereo audio recorders, e.g.
Switch power off when making connections 4: Connecting Loudspeakers 8000M - Standard Loudspeaker Connection If you are stacking the 8000M, by convention the Left Channel is the upper connection RIGHT Pre-Amp Left Output LEFT Connecting Loudspeakers Pre-Amp Right Output 8000M - Bi-Wired Loudspeaker Connection Bi-wiring offers improved sound quality because high and low frequency signals are carried individually to the loudspeaker drive units.
