User Instructions Integrated Amplifier 8000S Audiolab IAG House, Sovereign Court, Ermine Business Park, Huntingdon PE29 6XU Tel: 01480 447700 Fax: 01480 431767
1: Statutory & Safety Information CAUTION! RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER-REMOVEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL ADVERTISSEMENT: RISQUE DE CHOC ELECTRIQUENE PAS OUVRIR This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
5: Service and Warranty Servicing Audiolab limited warranty Servicing of Audiolab products should only be carried out by authorised service agents. If service is required the equipment should be returned, securely packaged, preferably using original packaging, to your dealer. In the UK equipment may be returned to the IAG Service Centre. In the USA equipment may be returned to the Service address shown on this page. Audiolab Ltd.
3: Input & Output Connections FUSE HOLDER MAINS INPUT RIGHT LEFT POWER AMPLIFIER INPUT LOUDSPEAKER TERMINALS Signal Connections PREAMPLIFIER OUTPUTS VCR TAPE 2 Standard Loudspeaker Connection Connecting Loudspeakers You can connect a speaker switching box or headphone adaptor to the unused set of speaker terminals Switch power off when connecting loudspeakers. Use good quality low resistance loudspeaker cable.
