User guide

AUDIOLINE TAM838 INSTALLATION

PARTS LIST

In the box you should find the following items:

# TAM838 (with line cord and power supply)

# Remote control card

# User guide

# Guarantee card

Please contact your retailer, if an item is missing or damaged.

CONNECTING

# Plug Power supply into a 230/240 volt mains outlet.

# Fit a 9V Alkaline backup battery (Display flashes “Lo” if battery is low or not

fitted).

# Connect telephone line cord to a telephone socket.

# Switch the power on, the unit will enter the initial start mode which takes about 30

seconds. During this time the display will show “Cr”. When initialisation is

complete the unit will emit four tones.

SWITCHING UNIT ON/OFF

# To turn the unit “ON” press the ON/OFF button.You will hear one long tone and

the display will flash “--”and “00 ”. Note: If you have not installed the battery

“Lo” will also flash.

# To turn the unit “OFF” press the ON/OFF button. You will hear one long and one

short tone and the display will turn off.