User guide

7
OTHER AUDIOLINE TAM838
DISPLAY
The 2-digit/7 segment LED display will show the following characters depending on
the mode of operation:
Cr Initialisation process
-- Indicates OGM not recorded or day/time not set
Lo Indicates battery is low
FL Indicates Memory full
A1 Indicates Announcement/Record playback
r1 Indicates Memo recording
r2 Indicates 2-way recording
00 Indicates no message but announcement recorded
P Indicates pause in playback mode
No display Indicates answer off.
FAULT FINDING
THE UNIT DOES NOT WORK
# Is the power adaptor connected correctly and power turned on?
# Is the line cord undamaged and connected correctly?
# Have you experienced a storm recently?
CALLS ARE NOT ANSWERED
# Check that the unit is switched on and set to answer mode.
THE UNIT DOES NOT RECORD MESSAGES
# Is there a mains power failure? The unit will not operate with no power. The backup
battery (if fitted) will only retain your messages, it will not power the units normal
operation.
MESSAGES CANNOT BE HEARD
# Is the volume control set to the lowest level? Press the •volume button.
MESSAGES ARE LOST AFTER A POWER FAILURE
# Insert or replace the battery when display shows “Lo”.