Operating instructions

Putting the Walkie−Talkies into Operation
25
The current battery charge status is indicated in the display:
Full Half empty Low Empty
The walkie−talkies need to be recharged as soon as the
indicator flashes in the display and acoustic warning
signals are issued.
Charging the walkie−talkies directly
Connect the power adapter plug to the headset/charging socket
on the walkie−talkies. For safety reasons, only use the power
adapter plug supplied.
Your radio will not Transmit / Receive during charging.
Set the main switch, located on the underside of the
walkie−talkies, to ON.
Mains power outlet
Note:
Use only power supply
KEAD−237 (DVE−DV−6400UP)
Do not charge the same radio with plug−in charger and
drop−in charger simultaneously.
For optimal battery life, disconnect the charging con-
nection after fully charging.
Before using the walkie−talkies for the first time, charge them for
at least 9 hours. When the walkie−talkies are connected correctly,
the red LEDs light up. They go out when the walkie−talkie are
fully charged.
Service−Hotline Germany: Tel. [phone] (cost via Telekom at time of going to print: 14 ct/min)