Operation Manual

- Operation -

Note: You can also get a dialling tone by first pressing the call button

. On

entering the digits of your required phone number, your telephone will dial the

number directly. With this method of making a call, it is not possible to correct

individual digits in the number in the manner described above.

4.4 Using two handsets

The two handsets have the internal numbers 1 and 2. This internal number is

shown on the right-hand side of the display. Incoming calls are signalled on both

handsets. If the other handset is already using the external line, the indicator

light on the receiver will illuminate on both handsets. In this case, it is not

possible to make a further external call.

4.4.1 Making an internal call

When you have connected multiple handsets to a base station, you will be able

to make internal calls.

To do this, press the

button and then the internal number of the required

handset. The call is accepted with the call button

on the handset called.

4.4.2 Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the

external call to another handset. To do this, press the

button and then the

number of the required handset.

If there should be no reply from the handset called, you can take the call back

with the button.

After the internal call has been accepted at the other handset, you have the

following options: