Operation Manual

- Operation -

4.12 Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that

buttons are not pressed unintentionally. Incoming calls can be received as

normal when the keypad lock is switched on.

Activating the keypad lock

Press the

button on the handset for three seconds. The

symbol will

appear in the display.

Deactivating the keypad lock

To deactivate the keypad lock, press the

button twice.

Note: The keypad lock can also be activated via the menu.

4.13 Temporary tone dialling

If you can only use your telephone in Pulse Dialling mode, you do not have to

forego the facilities of Tone Dialling (e.g. interrogating an answering machine).

You can change temporarily to Tone Dialling during a call by means of the

button (press 4 seconds). PULSE dialling will be reselected at the end of the

call.

4.14 Paging from the base station to the handset

If you cannot remember where you have left the handset, press the

button

on the base station. You will hear the handset audible signals for 30 seconds

and thus be able to find it again easily. You can cancel the audible signals earlier

by pressing any button on the handset or the

button on the base station.

4.15 Using the wake-up/alarm function

You can enter an alarm time using the integral wake-up and alarm function.

When this time is reached you will hear signal tones from the mobile unit for one

minute and the display will show the message ALARM ON. To cancel the alarm,

press any button on the mobile unit.

Note: The volume of the alarm depends on the volume set for the ring tone (see

Chapter 8.2). If the ring tone on the mobile unit is turned off altogether, the alarm

will sound at the lowest volume.