Operation Manual

- Caller display CLID -

6.1 The caller list

To view the phone numbers on the caller list, please proceed as follows:

1. Press the

button and the last phone number received will be shown in

the display. If the caller list is empty, the display will show the message

EMPTY.

2. Further numbers in the caller list can now be selected by means of the

and

buttons. If there are no more phone numbers available, you will hear

a signal tone. Two symbols in the display will tell you whether the call was

taken or not.

=> Missing call in your absence.

=> Received calls.

Notes: Information can be called up using the

button.

- If the phone number is longer than 12 digits, the remaining numbers will be

displayed.

- Displays the number when the name of the caller is already stored in the

phone book.

- Displays the date and time when this information is transmitted by the caller.

- If no further data are available, the display will show the message ADD?.

- You can return to the list once more by pressing the

button.

3. If you want to call back a number on the caller list directly, simply press the

call button and the number will be dialled immediately.

4. Exit the caller list by holding the

button pressed.