Operation Manual

- Special functions -

8.7 Changing display names

The display will show the duration of the call and the name of the mobile unit

alternately for a few seconds after a call has been ended. If you have logged on

several handsets to one base station, it can be useful to give each handset its

own name. The number after the HS shows with which number the handset can

be called internally.

1. Press the menu button

2. Select the HANDSET menu with

and

confirm with

3. Select the NAME function with and

and confirm with

4. Now enter the required name using the number pad. Letters already

entered can be deleted by repeatedly pressing the

button.

5. Confirm with

6. Now select further menu functions or exit the menu by pressing and

holding the

button.

8.8 Activating/Deactivating warning tones

Here, various warning tones can be activated or deactivated.

Button click

Each time a button is pressed, the handset confirms with a button click. The

button click can be switched on or off.

Warning tone for low battery

If the battery capacity is too low, a warning tone will remind you that you must

charge the handset.

Range warning

If you are too far away from the base station, a warning tone will remind you that

you are losing contact with the base station.