Operation Manual

- Multiple handsets -

9.1.2 Logging on other DECT-GAP telephones to the base station

In order to log on a DECT-GAP handset, follow the instructions in the other

supplier's operating manual and then press the

button on the base station

for 3 seconds. Use the PIN-Code 0 0 0 0 to log on.

9.1.3 Logging off handsets

A handset can only be logged off using another handset that is still logged-on. It

is therefore not possible to carry out the logging-off procedure using the handset

that is to be logged off.

1. Press the

button on the handset.

2. Select the SETUP menu with and

and confirm with

3. Select the DEL HANDSET function with and

and confirm with

4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and

confirm with the

button.

5. Now select the internal number of the handset to be logged off and

confirm with the

button. You can abort the process by pressing the

button. If the logging-off is successful, after a few seconds you will

hear a signal tone. The handset is now logged off and can no longer be

used for external and internal calls.

9.2 Additional base stations

You can increase the range of the handsets by using several base stations. In

order to make use of this effect, all base stations must be connected to a

telephone socket. Depending upon the application, you can allocate the same

telephone number to each base station or you can give the base stations

different numbers. Make sure that the ranges of all base stations overlap. Each

handset must be logging on to each basis station. Please test the range of the

handsets before putting a new base station into operation.