Operation Manual

30
REMOTE ACCESS AUDIOLINE 818G
After the last message, the machine answers with several signal tones. Now, within
the next 7 seconds, you have various possibilities. If you do not make any input within
these 7 seconds, the connection will be cut off automatically and all messages will
remain saved.
Repeat all messages Press 2 and #
Delete all messages Press 3 and #
Switch off answering machine Press 9 and #"
After this input, the AUDIOLINE 818G is no longer ready for operation.
Save all messages no input
Note: If you have deleted individual messages during play-back, these
are undeleted once more if you listen to all the messages again using 2
and #.
3.4 RE-RECORD GREETING USING REMOTE ACCESS
Call your own telephone number and allow the greeting message to run through to
the end. Wait until your answering machine is ready to record a message.
After the signal tone, enter your personal authorisation code by pressing the
appropriate numbers on the number pad of the remote control or of a telephone. A
signal tone confirms that the right code has been entered.
To re-record the greeting message, press the key combination 7 and #. Dictate your
new greeting after the signal tone.
Complete the message with the keys 7 and #. The new greeting will now be
repeated automatically.
Finish the call by putting the receiver down.