Operation Manual

- Operation -

4.4 Switching the parent unit on and off

Switch the parent unit on by pressing the On/Off button (15) for one second. A search will now be made for the baby unit and after

a few seconds the indicator (18) will light up green. If the baby unit does not find the parent unit, the indicator (18) will flash red.

If you want to switch the parent unit off, press and hold the On/Off button (15) for one second.

Note: The parent unit can also be used when it is sitting on the charging station. In this case, the standard rechargeable batteries

will continue to be charged, but full charging will take longer.

4.5 Adjusting the volume

Baby unit

The volume on the baby unit can be adjusted in five steps by means of the buttons

and (4). The volume that is set relates

to the playing of lullabies and, at the same time, to the volume for the intercom function. For more information see Chapter 4.8.

Parent unit

The volume on the parent unit can be set in five steps by means of the buttons

and (20). In addition, the loudspeaker can

also be switched off completely (SPEAKER OFF).

As well as audible transmission via the loudspeaker, noises are also displayed visually by means of five green and three red

indicators (21). Monitoring can therefore be carried out even when the volume has been reduced or switched off altogether.

Note:

x When the volume on the parent unit is switched off, it can still sound a warning tone if the baby makes a noise. For more

information see Chapter 4.10 .

x The volume on the parent unit will automatically be reset to a medium volume when the intercom function is used and the

volume was previously switched off.