Operation Manual

- Operation -

4.6 Setting the transmission sensitivity

The transmission sensitivity from the baby unit to the parent unit can be adjusted in 5 steps. In Step 5, even very quiet noises can

be heard at the parent unit. In Step 1, only loud noises can be heard. If you want to be sure that you will hear all noises, use

Step 5.

Note: This setting has no effect on the visual indication of noise on the parent unit.

1. Press the MENU button (19).

2. Select SENSITIVITY from the menu with the button (20).

3. Press the button (17). The display will show the sensitivity that is currently set in 5 steps.

4. Now select the required sensitivity using the and buttons (20).

5. Confirm with the button (17). The display will briefly show STORED and then the menu item SENSITIVITY.

6. Press the MENU button to exit programming.