Operation Manual

- Operation -

4.7 Playing lullabies

Five lullabies, each with a length of 30 seconds, have been stored to help your baby fall asleep peacefully. With several repeats,

the playing time amounts to approximately 5 minutes. Lullabies can be played both via the baby unit and via the parent unit.

Playing lullabies from the baby unit

You can find the required LULLABY 1 to 5 or select PLAY ALL by repeatedly pressing the

button (10). In the PLAY ALL

setting, all lullabies will be played one after the other for 5 minutes.

You can start and stop the playback by pressing the

button (6). You can pause playback by pressing the button (7) and

then continue with the same button

(7).

Playing lullabies from the parent unit

1. Press the MENU button (19).

2. Select LULLABY from the menu with the button (20).

3. Confirm with the button (17). The display will show PLAY?.

4. Press the button (17) once more and the lullaby that was last played will be played again. If you want to select a

different lullaby, first press the

button (20). The message CHOOSE LULLABY will appear in the display.

5. Confirm with the button (17).

6. Now select the required lullaby using the and buttons (20). Or select PLAY ALL.

7. Confirm with the button (17) and the selected lullaby will be played. In the PLAY ALL setting, all lullabies will be played

one after the other for 5 minutes.

8. The button (17) can be used as a PAUSE button during playback.

9. To stop playback, press the MENU button (19). The display will show LULLABY OFF?.

10. Confirm with the button (17) and playback will be stopped.