Operation Manual

- Operation -

Note:

x While the lullabies are being played, the

indicator and the name of the lullaby currently being played will appear in the

display of the baby unit and also of the parent unit. In this way, you can tell from the parent unit whether a lullaby is being

played.

x If playback is switched to Pause, then the

indicator will flash in both displays.

x The pause must not be longer than 60 seconds. After this, playing of the lullaby will be stopped automatically.

x You can make full use of the entire menu on the parent unit even when lullabies are being played.

4.8 Intercom function to the baby

You can speak to the baby in order to calm it by using the intercom function. To do this, press and hold the TALK button (14) on

the parent unit and speak. You will be able to hear the baby again when you release the TALK button (14). The indicator light

(11/18) on both the parent and baby unit will flash while you are speaking.

Note: If the volume on the parent unit is switched off, this will be automatically reset to a medium volume.

4.9 Temperature monitoring

The temperature in the baby's room is shown continuously on both displays. Make sure that the temperature probe is not covered

by any objects.

An adjustable temperature range can also be monitored. If the temperature falls outside this range, you will hear a short signal

tone at the parent unit each time this occurs and the temperature indication will flash in the display. If the temperature rises or falls

further, you will hear these short signal tones each time it changes.

Note: Normally, the signal tone will sound for every degree that the temperature rises or falls outside the set temperature range.

You can offset the range by 2°C up or down by pressing any button on the parent unit so that the signal tone will only sound the

next but one time the temperature moves out of the range.