Emergency telephone Operating Instructions BIGTEL 49 PLUS
1 Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 Safety Information . . . . . . . . . . . . . . . . Putting the Telephone into Operation . . . Operating Elements . . . . . . . . . . . . . . . Operating the Telephone . . . . . . . . . . . Telephoning . . . . . . . . . . . . . . . . . . . . Private Branch Exchanges / Suppl. Services . . . . . . . . . . . . . . . . Menu Structure . . . . . . . . . . . . . . . . . . Phone Book . . . . . . . . . . . . . . . . . . . . Calls List / CID . . . . . . . . . . . . . . . . .
Safety Information 1 Safety Information Please read this operating instruction manual thoroughly. Intended use The telephone is suitable for telephoning within a public telephone network system. Any other use is considered unintended use. Unauthorised modification or reconstruction is not permitted. Under no circumstances open the device or complete any repair work yourself. Installation location Prevent excessive exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.
Putting the Telephone into Operation 2 Putting the Telephone into Operation Safety notes Connecting the telephone Caution: It is essential to read the safety information in Chapter 1 before preparing the telephone for use. Connect the telephone as illustrated in the diagram. Only use the telephone connection line supplied because the equipment may not function if another telephone connection line is used.
Putting the Telephone into Operation Inserting the batteries Wall installation Insert the batteries in the open battery compartment. Only use batteries of the type AA 1.5 V. Pay attention to the correct polarity. Close the battery compartment cover. The telephone can also be installed on a wall. You require two screws in order to fix the telephone on a wall. Feed the guide tabs (1) on the wall−mounting bracket (2) in the slots (3) on the rear side of the telephone.
Operating Elements 3 Operating Elements Telephone 1 2 Call back button One−touch dialling button M1 (emergency call number 1) 3 Delete 4 One−touch dialling button M2 (emergency call number 2) 5 Scroll upwards 6 Quick dial button 7 Scroll downwards 8 Calls list (CID1) / Cancel2 9 New call indication 10 Phone book 11 Save number button 12 R button 13 Redial button 14 LED, telephone is ringing 15 LED, handsfree mode 16 Handsfree mode button 17 Receiver +40 dB boost button 18 Volume boost on LED 19 Control kn
Operating the Telephone 4 Operating the Telephone Display and explanation of operation sequences 2x 2 sec Press and hold Release Text Enter digits or letters Press the button depicted briefly Press the button depicted twice, briefly Press the button depicted for 2 seconds Press and hold the button depicted Release the button depicted Telephone rings Lift the receiver Replace the receiver on−hook Text flashes in the display GERMAN or Text or icon in the display Icons and texts in the d
Telephoning 5 Telephoning Taking a call One−touch dialling , or Take the call Ending a call or End the call Making a call Enter the phone number (max. 22 digits) Following incorrect input, press to delete the last digit or or Dial the number It is also possible to lift the receiver first to obtain the dialling tone. The digits in the phone number then entered are dialled immediately. It is not possible to correct wrong digits individually using this dialling procedure.
Telephoning Increasing the receiver volume on +40 dB. The receiver volume can be increased by pressing the left−hand side of the loudspeaker key marked +40 dB Increasing the volume on + 40 dB Tone control The tone of the receiver can be adjusted using the corresponding slide control on the right−hand side of the housing. Adjust the tone using the slide control Tone adjustment is only possible when the receiver volume +40 dB boost button is on.
Private Branch Exchanges / Suppl. Services 6 Private Branch Exchanges / Suppl. Services R button on private branch exchanges 3 If the telephone is connected to a private branch exchange, functions such as transferring calls and automatic call back can be used via the R button. Please refer to the operating manual supplied with your private branch exchange to determine, whether the telephone will work properly with the exchange.
Menu Structure 7 Menu Structure Main menu5 Press button for 4 sec to open the main menu. Press button or to select the required setting. Press button to confirm your selection.
Phone Book 8 Phone Book 6 Thirty−two phone numbers can be stored in the phone book together with the associated names. Always enter the area access code with the phone numbers so that the telephone can also assign incoming local calls to a phone book entry. When the memory capacity of the phone book is used up, the message MEMORY FULL appears when an attempt is made to store another number. To create space, an existing entry must first be deleted. The phone book entries are arranged alphabetically.
Calls List / CID 9 Calls List / CID 8 A total of 32 call numbers can be stored in the calls list. The flashing red LED indicates new calls in the calls list. Displaying phone numbers in the calls list , or Display messages: Open the calls list and select an entry Display Description NEW The entry in the calls list is new. The caller in the calls list has called several times.
Emergency Call 10 Emergency Call The emergency call unit can be used to dial an emergency services exchange or persons for assistance. There are several appropriate emergency service call numbers available, such as the Red Cross, St. John’s Ambulance Brigade, etc. In some countries emergency calls are not free of charge. The unit can also be used for private emergency calls within the family, for example.
If Problems Occur 11 If Problems Occur Service Hotline Should problems arise with the telephone, please refer to the following information first. In the case of claims under the terms of guarantee, contact your sales outlet. There is a 2 year period of guarantee. Problems Reply No telephone calls possible − The telephone line is not connected properly or is defective. Only use the telephone connection cable supplied.
Maintenance / Guarantee 12 Maintenance / Guarantee Maintenance Clean the housing surfaces with a soft, fluff−free cloth. Never use cleaning agents or solvents. Guarantee Amplicomms equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble−free functioning and a long service life.
Index 13 Index C Caller number display, 11 Calling back missed calls, 9 Calls list, 14 CID, 14 Connecting the telephone, 5 Contrast setting, 12 Creating phone book entries, 8, 13 D Date, 6 Date and time setting, 12 Declaration of Conformity, 17 Deleting entries from the phone book, 13 Deleting phone numbers from the calls list, 14 Dialling pause, 11 Dialling phone numbers from the phone book, 9 Display, 8 Displaying phone numbers in the calls list, 14 E Editing entries in the phone book, 13 Emergency call
Notes Notes 19
Important Notes on the Guarantee The period of guarantee for the AMPLICOMMS product begins on the date of purchase. Rights to claims under the terms of guarantee relate to deficiencies resulting from material or production faults. Rights to claims under the terms of guarantee are annulled following intervention by the purchaser or third parties.
