Operating instructions

4 CHANNEL
VIDEO RECEIVER (ACTIVE)
VIDEO BALUN
•Frequency Response Range: DC-6MHz;
Common- Mode / Differential-Mode
rejection: 15KHz-6MHz 60dB type
•Wire Type: 24AWG UTP CAT5 or higher
•Impedance: UTP or Connection or RJ-
45: 100Ω; BNC Coax:75Ω •Power: 12Vdc
300mA •Dimensions: 120 x 83 x 32
EV04AR
COAXIAL BALUN FOR DVR
•BNC male to BNC female with mini
cable 11.8” •Gives DVR immunity from
interference •Built-in a highly balanced
mode of video transmission which is
immune to interference from sources of
noise: data signals, other video signals,
nearby power, fluorescent lights, and
more
VID-DVR
ACTIVE
RECEIVER HUB IN 1U RACK
MOUNTING PANEL
•Built-in highly balanced mode of video
transmission for extra interference
immunity •Built in transient protection
and ground lifting
EV08AR-1U: 8 CHANNEL
EV16AR-1U: 16 CHANNEL
PASSIVE
TRANSCEIVER HUB IN
1U RACK MOUNTING PANEL
•As a rack mounting passive transmitter
hub, use with active receiver at a distance
up to 3,200 ft. •Passive, no power
required •Built-in highly balanced mode
of video transmission for extra
interference immunity
EV08P-1U: 8 CHANNEL
EV16P-1U: 16 CHANNEL
1 INPUT TO 4 OUTPUT
VIDEO DISTRIBUTOR
•Coaxial Cabling •Dual Power:
DC12V/AC24V
VID-DIST
1 INPUT TO 1 OUTPUT
VIDEO AMPLIFIER
•10dB video gain compensation,
amplification and HF compensation
•Sharpness and brightness
adjustment works perfectly with DVR
•3,200 ft. transmission range
VID-AMP
4 INPUT TO 4 OUTPUT
VIDEO AMPLIFIER
•4 video input to 4 video output
•10dB video gain compensation,
amplification and HF compensation
•Sharpness and brightness
adjustment works perfectlywith DVR
•Transmission range: 3,200 ft.
(RG59 coaxial cable)
VID-4AMP
OPERATE A 12Vdc CAMERA
IN A 24Vac SYSTEM
•Operate your 12Vdc cameras on a variety
of voltages •Regulated 12Vdc output @
500 mA •Accepts 15 to 30Vdc, 20 to
28Vac and converts it to 12Vdc •Voltage
input via 2-pin terminal block •Mechani-
cal: Converter is 63x29x25mm; Input and
output cables are 15cm each
VID-2412CONV
POWER AND VIDEO
OVER CAT-5E
GOOD FOR UP TO 600FT
•6 pin terminal connector for easy
connections. •Power cable could be
one, two or three pairs based on
camera power consumption and
transmission range. •RoHS compliant.
VID-CAT2 / PAIR
VIDEO & POWER PASSIVE
TRANSCEIVER
•Transmit or Receive real-time color or
B&W video signal •Color video up to
1300ft (400m) in pairs via UTP Cat5e/6
•Power signal up to 750ft (250m) in
pairs; 12V/24V, DC/AC •Built-in TVS for
surge protection
EV01P-VP / PAIR
4 CHANNEL
VIDEO TRANSCEIVER (PASSIVE)
VIDEO BALUN
•4 x BNC female to 1 x RJ45 female +
8 pin terminal block •Four passive
transceivers in one product •Choice of
RJ45 or push pin terminal inputs/ outputs
•Dimensions: 3.2" x 3.2" x 1.1"
EV04P
PASSIVE GROUND LOOP
ISOLATOR
•Eliminate image distortion caused by
ground loops •Eliminate problems as
image tearing, cross-talk, rolling and so
on •Protect CCTV system from interfer-
ence of electrical cable •Built-in 800V
video isolator, eliminate interference
effectively working with DVR •Built-in
super surge protection circuit
EV01P-GLI
VIDEO, POWER & DATA
PASSIVE TRANSCEIVER
•Transmit or Receive real-time color or
B&W video signal •Color video up to
1300ft (400m) in pairs via UTP Cat5e/6
•Power signal up to 750ft (250m) in
pairs; 12V/24V, DC/AC •Transmit PTZ
data signal up to 1000ft (300m) in pairs
•Built-in TVS for surge protection
EV01P-VPD / PAIR
VIDEO TRANSCEIVER BNC
TO SCREW TERMINAL
•BNC (male) to screw terminal for easy
connection •Compact size. Multiple units
could be mounted behind multiplexer,
quad, DVR, etc. •Sold in packs of 10
•Also available with 10cm mini coax
cable: MVTBNCSCRPTL (sold
individually) •2 year warranty
MVTBNCSCR / 10 PACK
VIDEO TRANSCEIVER BNC TO
SCREW TERMINAL - WITH
10CM MINI COAX CABLE
•BNC (male to screw terminal for easy
connection •Compact size. Multiple units
could be mounted behind multiplexer,
quad, DVR, etc. •Sold in packs of 10
•2 year warranty
MVTBNCSCRPTL /EACH
GROUND LOOP ISOLATOR
BUILT-IN VIDEO BALUN
•BNC male to 2 pin terminal block (UTPGL)
or BNC female to BNC male with mini cable
on both sides (VIDGL) •Built-in video
BALUN transmits a full motion mono-
chrome video signal up to 1900', color
video signal up to 980' •Eliminates coaxial
cable •Built-in Transient Voltage Suppres-
sors for surge protection •UTPGL is sold in
pairs (UTPGLPR) •2 year warranty
VIDGL
VIDEO SURVEILLANCE
17
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
ACCESSORIES
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:56 AM Page 17