Operating instructions

HDMI SWITCHERS WITH AUTO SWITCHING
•Allows for digital switching between
4 sources and a video display without
signal degradation •Input ports: 4 HDMI
(female type) •Output ports: 1 HDMI
(female type), 1 Ethernet port, 1 S/PDIF
port, 1 IR 3.5m port •Supports resolutions
between 480i and 1080p, and 640 x 480
through 1600 x 1200 •Compatible with
HDCP signal and deep colors up to 36-bit colors at 1080p 60Hz •Supports Dolby
TrueHD and DTS-HD Master audio signals •Bi-directional HDMI Ethernet channel-
allows you to transfer internet to all HEC capable devices via a single HDMI cable
•Audio return channel and an HDMI 100 Mbps Ethernet port for HDMI Ethernet Channel
(HEC)- reduces amount of wires necessary for all compatible systems and allows for
on-board TV tuners to stream audio to a A/V receiver through a single HDMI cable
AT-HD4-V41: 4 X 1
AT-HD4-V42: 4 X 2
Same as above, but with Output ports: 2 mirrored HDMI (female type) ports,
2 Ethernet ports, 2 S/PDIF ports, 1 IR 3.5m port
10 X 1 MULTI-FORMAT
CONVERTER/ SWITCHER WITH
HDMI OUTPUT
•Inputs from composite (2), S-video (2),
component video (2), VGA (1), and HDMI
(3) sources •Provides a single HDMI out-
put with resolutions up to 1080p •Band-
width - 2.25 Gbps per channel •Supports HDMI v1.3 specification •Deep color video up
to 36 bit •Capable of switching 3D format video signals •Transfers audio signals via em-
bedding with the video signal •Audio delay up to 150 ms avoids lagging of audio with
respect to the corresponding video signal •Input resolutions up to SXGA @ 75 Hz and
1080p •3D noise reduction, which eliminates artifacts and noise for efficient conversion
•3D comb filter enhances image quality via 3 consecutive horizontal scan lines •Com-
patible with PAL, SECAM, and NTSC (3.58/4.43) formats •Supports format conversion
from 480i/576i to 480p/576p •HDCP compliant - jitter-free connection with the con-
nected devices •Control via an IR remote, RS232, or through manual button selection
on the front panel •Includes rack mounts
AT-HD600
2 x 1 SIGNAL SENSING AUTOMATIC VGA
+ ANALOG AUDIO SWITCHER
Atlona AT-APC21A is a high performance, signal sensing
VGA switcher. Simply senses the presence of a video sig-
nal and automatically switches to the active VGA source
to be routed to a display. The automatic selection of the
active channel eliminates the need of manual control
•Switch between two VGA w/Audio sources to a single monitor and set of speakers
•Connector Input: Two sets of HDB-15 (female) & 3.5 mm audio jack •Connector
Output: One set of HDB-15 (female) & 3.5 mm audio jack •No software required
•Supports VGA, XGA, SVGA, SXGA, UXGA, WUXGA, Multi-Sync and TFT-LCD monitors
•Supports stereo audio •Auto detect monitor type and DDC2B signal for each port
•Supports 350 MHz bandwidth with maximum VGA resolution of 2048x1536
•Video enhancement to extend quality video up to 30 meters •Auto switch to new
connected VGA channel (Auto Detect & Select) •Optional external control button for
manual selection •Dual color LED to indicate active channel status •Power-free,
electronic design to protect connected devices
AT-APC21A
4 x 1 VGA +
STEREO AUDIO SWITCH
Atlona AT-PC41A is a high performance
VGA switcher with remote
•LED indicators, tells you which input is
currently active •Video Inputs: 4 x HD15
connectors (VGA or Component Video
Compatible) •Audio Inputs: 4 x 3.5mm mini
audio inputs •Video Output: HD15 connector
( VGA or Component Video Compatible ) •Audio Output: 1x 3.5mm mini audio input
•IR remote control. •Supports high resolution input: PC: VGA, SVGA, XGA, SXGA,
UXGA (1600x1200) and WUXGA (1920x1200), & HDTV: 480i, 576i, 480p, 576p, 720p,
1080i and 1080p. •Bandwidth: 650MHz •Plug and play, easy to install and operate
•Built-in advance circuit ensures a smooth transition when switching from one PC/HD
source into another •RS-232 interface allows control from a distant device.
(Download RS232 Commands) •Audio format: L/R analog •Rack mountable
AT-PC41A
HDMI
DISTRIBUTION
AMPLIFIERS
Passes 4Kx2K, the highest currently available
resolution, plus Dolby True HD, DTS HD Master
Audio, and 3D up to 48-bit deep color.
HDBASET HDMI
DISTRIBUTION AMPLIFIER
OVER A SINGLE CATEGORY CABLE
Distribution amplifiers “clone” audio and
video from one source and send it to many
displays in many locations. Atlona HDBaseT DAs use and power over category cable
(PoCc™) to reach longer distances more reliably, and Atlona’s proprietary combination
of features keep installation and upgrade simple.
•EDID learning mode to ensure compatibility •Built in S/ PDIF and Analog audio loop
outs •Supports pass through of all 3D formats •Pass through support of all Lossy
and Lossless audio (up to Dolby TrueHD or DTS-HD Master Audio) •Locking HDMI
port •Field serviceable firmware port •Includes dual purpose wall/ rack mount ears,
IR remote
AT-HDCAT-4: 2 X 4, UP TO 230'
AT-HDCAT-8: 2 X 8, UP TO 230'
AT-HDCAT-8ED: 2 X 8, UP TO 330'
VGA DISTRIBUTION AMPLIFIER with
AUDIO and CONSTANT POWER “ON”
The Atlona Technologies AT-VGA12A and AT-
VGA14A are a great solution when uninterrupted
video is required. The multiple power solutions give
the user security of having backup power in case of
an emergency.
•Self powered (via VGA Cable), power supply is only required for 2k resolutions to be
displayed through all 2 outputs •Optional USB power •Plug & Play - no drivers or soft-
ware required •Connects up to 2 or 4 VGA displays with stereo audio •Supports VGA
2k resolutions up to 2048 x 1536@60/70/85Hz •Stereo audio via 3.5m audio •Easy in-
stallation •Brackets included for mounting •Perfect for Commercial or Government ap-
plications •Input 1 x VGA and 3.5m Stereo audio •Output 2 or 4x VGA and 3.5m
Stereo audio
AT-VGA12A: 1 x 2
AT-VGA14A: 1 x 4
HIGH SPEED HDMI EXTENDER KIT
OVER SINGLE CAT 5/ 6/ 7 WITH
FULL 3D SUPPORT (1080p up to 130ft)
The Atlona AT-HD4-SI40SR is an HDMI over Cat
5/5e/6/7 Extender Kit, which allows Deep Color and
full 3D support plus DTS-HD and Dolby TrueHD over
a single low cost Cat 5/5e/6/7 interface with up to
130ft full HD 1080p or 1920x1200.
•Transmits HD signals (at Full HD 1080p) from HDMI source over single CAT5/ 5e/ 6/ 7
•Transmission distance - up to 130' (40 m) •Supports Deep Color and Dolby True-HD
and DTS-HD audio formats •Uncompressed 7.1ch digital audio conserved over HDMI
to CAT 5/ 6/ 7 cable transmission •Suitable for extending HDMI source (such as a
Blu-Ray player, Sony PlayStation, or Apple TV from a remote location) •Supports
cascading •Compliant with HDCP and EDID standards •Wall mounting housing design
for easy and robust installation
AT-HD4-SI40SR
AT-HDDA-2: 1 X 2
AT-HDDA-4: 1 X 4
AT-HDDA-8: 1 X 8
INSTALLATION ACCESSORIES
29
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
HDMI / VGA PRODUCTS
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:57 AM Page 29