Operating instructions

35, 60,100, 150 or 250 WATT
•7 inputs: 4 MIC (Lo-Z), 1 AUX (Hi-Z),1 MIC/TEL, 1 MIC/AUX •4-Ohm, 8-Ohm,
25V, 25VCT, and 70V outputs •Dual-function, 10-band graphic equalizer
•Aphex® Aural Exciter for improved intelligibility •Switchable phantom power
supply •Variable Aux input muting •Remote master volume control capability
•Voice-activated Aux muting onTel input •Aux fade back after Tel page •Ther-
mal and overload protection •3-speed cooling fan (GS250 only) •Rack-mount-
able w/ accessory mounting kit (2 rack spaces) •UL and CSA listed
GS35: 35 WATT
GS60: 60 WATT
GS100: 100 WATT
GS150: 150 WATT
GS250: 250 WATT
ACCESSORIES
GSTRC: Tamper Resistant Cover
GSRPK: Rack Panel Mounting Kit
GSRVC: Remote Volume Control
GOLD SEAL SERIES
BOGEN
•3 Mono power levels: 600W, 900W, or 1200W for 70V speaker systems •3 Stereo power
levels: 300W, 450W, or 600W per channel @ 4 Ohms •3 Modes of operation to choose
from:Stereo (4-Ohm), Dual Mono (4-Ohm), or 70V Mono •Professional, high-impedance,
balanced stereo input module included (BAL2S) •3 selectable low-frequency roll-off choices
•2x mixer function when in mono modes •Insert connections for outboard equipment (in
mono modes) •DC, overload, short circuit, and thermal protection circuits •Clip limiting cir-
cuits for speaker protection
M300: 300 Watt/ Channel Stereo, 600W Mono
M450: 450 Watt/ Channel Stereo, 900W Mono
M600: 600 Watt/ Channel Stereo, 1200W Mono
ADVANCED INPUT MODULES
BRG1R: BRIDGING INPUT: Daisy chain multiple amplifier inputs
MAX1R: MONO AUX INPUT: Unbalanced mono input module
BAL2S: BALANCED INPUT: Stereo, balanced input
SAX1R: STEREO AUX INPUT: Unbalanced stereo module
MIC1S: (Screw Terminal), MIC1X (XLR Connector)
Low-impedance, transformer-balanced microphone inputs
MIC2S: (Screw Terminal), MIC2X (XLR Connector)
Low-impedance, electronic-balanced microphone inputs
TBL1S: TRANSFORMER BALANCED INPUT: Transformer balanced AUX input
TNG1S: TONE GENERATOR: Multiple Tone Generator Input
TEL1S: TELEPHONE INPUT
Interfaces to telephone system's loop start/ ground start trunks or paging ports
BOGEN
•Power MOSFET output circuitry
•Thermal protection and automatic
electronic overload protection •Hi-Z unbalanced and Lo-Z balanced or unbal-
anced input w/ accessory transformer (TL600) •Internal lo-cut filter switch
•90 dB signal-to-noise •4 and 8-ohm, 25V and 70V outputs •Line bridging
(driving multiple amplifiers) is possible w/ an accessory transformer (TL100)
•19" rack-mount design (3 RU)
HTA125A: 125 Watt Amplifier
HTA250A: 250 Watt Amplifier
•1 input: Hi-Z unbalanced •Lo-Z balanced input with accessory transformer
•Input level control and lo-cut filter switch •8-Ohm/25V, 1 6-ohm, 25V, and
70V outputs •UL & CSA listed
BPA60: 60 Watt Amplifier
RPK53: Rack Panel Kit
MIC/ LINE MIXER
CAM8PRO
•8 independently assignable inputs •Dual-bus design with Main/Aux output se-
lector for each input •Pluggable terminal strip connections •Separate Auxiliary
input •Balanced inputs and outputs •Direct bus connection for cascading multi-
ple mixers •MIC/Line switch for each input and Main output •Gain/Trim Control
for each input •Switchable Phantom Power for condenser MIC inputs •Input
Level Control knob for each input •Output Level Control knob for Main and AUX
outputs •Single-rack space
CAM8PRO Added Features : •Compressor/Limiter (Main output)
•Compressor/Limiter Bypass switch •Adjustable Threshold and Ratio Controls
•LED Bar Graph Output Meter (Peak or Average) •Headphone Output
CAM8 PRO
BOGEN
MIXER/ PRE-AMPLIFIER
•4 Microphone inputs •Low-imped-
ance, balanced mic inputs •1 High-im-
pedance auxiliary input •Low-noise, active mixing •Master volume control •Input
clipping indicator for each channel •XLR mic input connectors •Phantom power
selectable per mic input •Unbalanced line level output •Balanced XLR output
•Bridging input for connecting together multiple CAM2 mixers •Rack- or wall-
mounted with RPK35B •11-3/8”Wx2-5/8”Hx7-3/8”D/ 3 lbs
CAM2:
RPK35B: RACK MOUNTING KIT
BOGEN
M-CLASS SERIES
300, 450, 600 WATT
BOGEN
MONO CHANNEL POWER AMPLIFIERS
BOGEN
125 and 250 WATT
60 WATT
35, 60, 100, 150 or 250 WATT
The amplifiers are designed to work with both
high- (70/25V) and low-impedance (4/8-Ohm)
speaker systems. Each model includes eight module bays for input modules and allows up to
four levels of priority between modules.Two module bays are also capable of accepting sig-
nal-processing output modules. Modules required, but sold separately.
POWER VECTOR
MODULAR AMPLIFIERS
BOGEN
V35: 35W Power Vector Amp
V60: 60W Power Vector Amp
V100: 100W Power Vector Amp
V150: 150W Power Vector Amp
V250: 250W Power Vector Amp
ACCESSORIES
PVSC: Power Vector Security Cover
PVMC: Module Security Cover
RVCP: Remote Volume Control Panel
RPK87: Rack Mounting Kit
ADVANCED INPUT MODULES
BRG1R: BRIDGING INPUT: Daisy chain multiple amplifier inputs
MAX1R: MONO AUX INPUT: Unbalanced mono input module
BAL2S: BALANCED INPUT: Stereo, balanced input
SAX1R: STEREO AUX INPUT: Unbalanced stereo module
MIC1S: (Screw Terminal), MIC1X (XLR Connector)
Low-impedance, transformer-balanced microphone inputs
MIC2S: (Screw Terminal), MIC2X (XLR Connector)
Low-impedance, electronic-balanced microphone inputs
TBL1S: TRANSFORMER BALANCED INPUT: Transformer balanced AUX input
TNG1S: TONE GENERATOR: Multiple Tone Generator Input
TEL1S: TELEPHONE INPUT
Interfaces to telephone system's loop start/ ground start trunks or paging ports
LMR1S: LINE/MIC INPUT: Actively balanced, terminal with remote volume control
SIGNAL PROCESSING OUTPUT MODULES
RIO1S: RELAY INPUT/ OUTPUT
ANS1R: AMBIENT NOISE SENSOR
PEQ1R: PARAMETRIC EQUALIZER
COMMERCIAL SOUND
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
34
PA AMPLIFIERS
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:57 AM Page 34