Operating instructions
EUROCOM- SN SERIES
80-WATT MIXER AMPLIFIER
•DUAL DRIVE TECHNOLOGY, PROVIDES TWO INDEPENDENT CHANNEL
MIXER POWER AMPLIFICATION WITHIN EACH ENCLOSURE FOR DISTRIB-
UTED MUSIC, PAGING AND AV APPLICATIONS.
70V
•Transformerless, cool-running Class-D amplifier drives 70 V loads directly
•3 balanced or unbalanced microphone inputs on TRS connectors •2 Aux inputs for
music or program signals on RCA connectors •Variable voice-activated music muting
•Lo and Hi frequency EQ for ultimate sound adjustment •Secure 2-position terminal
strip speaker output connector •Independent DC and thermal overload protection plus
automatic limiters for each amplifier prevent overload, clipping and distortion without
shutting down audio
SN2108
70/ 100V and 4-Ohm
•2 transformerless, cool-running Class-D amplifiers simultaneously drive 70/100 V and
4 Ω loads with adjustable Balance control •3 microphone inputs on XLR/TRS or Eu-
roblock connectors with switchable Mic/Line and Phantom Power •Dedicated Tel/Page
input with adjustable gain on Euroblock connector for paging •Assignable Zone 2 out-
put with adjustable gain control on Euroblock connector •Pre Out/Amp In processing
loop for each amplifi er channel on dual RCA connectors •2 Aux inputs for music or
program signals on RCA connectors •Variable voice-activated or contact-activated
music muting •Lo and Hi frequency EQ for ultimate sound adjustment
SN2408
80-WATT MIXING AMPLIFIER
WITH DUAL 70/ 100V AND 8 OHM OUTPUTS
•2 transformerless, cool-running Class-D amplifiers simultaneously drive 70/100 V
and 8 Ω loads with adjustable Balance control •8 Mic/Line inputs on Euroblock,
XLR/TRS and RCA connectors, each with switchable Mic/Line and Phantom Power,
individual Trim control and post-trim input level LED •Inputs 1-8 individually
assignable to Zone 2/MOH output; Aux inputs 5-8 individually assignable to Main Mix
•Dedicated page input accepts telephone or paging microphone and features priority
muting across all inputs •Wired Remote volume, power and mute control connector
•Individual front panel input Level plus Lo and Hi Main EQ controls •Main mix output
on Euroblock connector with selectable 70/100 V and 4 Ω outputs •Recording output
and Zone 2/MOH assignable output with independent gain control •2 Preamp
Out/Amp In processing loops for each 70/100 V and 8 Ω output
MA4008
MULTI-FUNCTION AUTO-MIXING AMPLIFIERS
WITH DUAL 70/100V AND 4 Ω OUTPUTS
MA6018: 180 Watt
MA6008: 80 Watt
DUAL DRIVE LOW-Z/HIGH-Z POWER AMPLIFIER
MA6480: 240 Watt, 70V @ 4 Ohm
EUROCOM
AX SERIES
900/ 1000 WATT, 70/ 100V
HIGH-IMPEDANCE POWER AMP
•ENERGY-EFFICIENT •DSP-POWERED
•ETHERNET/ USB-CONTROLLED
•Selectable 70V/ 100 V operation for distributed systems •Top-quality DSP for delay,
crossover, dynamics, and EQ •Front-panel setup via LCD display and intuitive con-
trols •Front-panel metering and indicators for mute, fault, over- current, overdrive,
and clipping •Setup, control, and monitoring via USB or remotely over IP (Ethernet)
with downloadable PC software •Line level inputs 2 x 3-pin Euroblock and XLR/ TRS
combo PC control Type B USB on front or IEEE 802.3 •Ethernet network connector on
back panel •Input impedance 10 kΩ unbalanced, 20 kΩ balanced •Outputs 4-position
barrier strip •Minimum load impedance 14Ω (70V)/ 20Ω (100V) •3.5”Hx17”Wx16"D
AX6220Z: 70V: 1000W (2 CH @ 500W)
AX6240Z: 70V: 1800W (2 CH @ 900W)
4000/ 2600 WATT
LOW-IMPEDANCE AMPLIFIER
•Ultra-reliable, dual-channel power amplifier designed for
continuous operation in distributed music, paging and AV
applications •2 transformerless, cool-running Class-H amplifiers
drive low impedance loads down to 2 Ω •High-performance DSP •DSP section
features sophisticated delay, crossover, EQ (8 parametric, 2 dynamic), dynamics
processing and lockable security settings •Can be set up, controlled and monitored
through standard Ethernet network or on-site via front panel USB connector
•Front panel LCD display enables setup and adjustment without PC •2 line level inputs
via 3-pin Euroblock or XLR/TRS combination connectors •NL4 type and screw-down
binding post outputs for ultimate flexbility and reliability •Front panel VU metering,
mute indication, system fault, over-current or overdrive indicators and illuminated
master volume ring with clipping indication
AX6220
2 X 480W @ 8 Ohms, 2 X 900W @ 4 Ohms, 2 X 22500W @ 2 Ohms
Bridged Mono: 1750W @ 8 Ohms, 2600W @ 4 Ohms
AX6240
2 X 680W @ 8 Ohms, 2 X 1300W @ 4 Ohms, 2 X 1400W @ 2 Ohms
Bridged Mono: 2560W @ 8 Ohms, 4000W @ 4 Ohms
•100 Watts RMS per output (4 Ohm). •85 Watts RMS per output (8 Ohm)
•200 Watts RMS into 70 Volt (8 Ohm). •1/4" and RCA inputs. •Input Impedance:
10K-Ohms balanced •Power: 120Vac 60Hz 2.5A, 230Vac 50 Hz
•19" x 3.5" x 7.5" (48 x 9 x 19 cm), 12 lbs (5.5 kg)
RA2100B
500W, 70V HIGH EFFICIENCY POWER AMP
•RMS Power: 500W •Frequency Response: 70Hz – 18kHz •Main Power Supply
Voltage: 110V – 120VAC, 50/60Hz •Speaker Output: Single output for both 70V and
8 Ohm speakers •Auxiliary Output: XLR •Auxiliary Input: XLR or terminal
•Input Sensitivity: 1.2V •Input Impedance: 20K Ohm •Signal-to-noise Ratio: >90dB
•Non-linear Distortion: <0.1% (1kHz, 1/3 nominal output power) •Operating Condi-
tions: 95% RH, 0ºF – 104°F (no condensation) •15.75” (W) × 3.46” (H) × 19” (D)
•Weight: 18 lbs. •Rack Mount: Built-in
P500A
STEREO 100W/ CHANNEL RMS POWER AMP
COMMERCIAL SOUND
PA AMPLIFIERS & ACCESSORIES
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
(631) 226-2700 • FAX: (631) 226-2770 • E-MAIL: sales@rnjelectronics.com
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
36
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:57 AM Page 36