Operating instructions

•Frequency Response: 65 Hz-19 kHz •LF Driver 6-
1/2" (165mm) Polypropylene Cone •HF Driver 3/4"
(20mm) Polycarbonate Dome •Power Input
(Max.) 75W @ 16 ohms; 32W @ 70V/ 100V
•Power Settings (in watts) 70V: 32, 16, 8, 4, 2, 1 /
100V: 32, 16, 8, 4, 2 •Size: 12-5/16" dia. x 12" D
•Minimum Vertical Clearance Requirement 11"
HFCS1
REDUCED BACK CAN DEPTH
Same as HFCS1, but with Minimum Vertical Clearance of 6-3/4"
•Frequency Response: 78 Hz-19 kHz •7-3/4 lbs.
HFCS1LP
•45 Hz to 19 kHz Frequency Response (-10 dB)
•6-1/2" MDT Metal-Alloy Cone •20 mm (3/4")
Polycarbonate Dome HF Driver •Usable Coverage
Area 140° Dispersion •Impedance Ratings Low
(16 ohms) / High (70V/100V) •Power Input (Max.)
100W @ 16 ohms; 32W @ 70V/100V
•Power Tap Settings (in watts): 70V: 32, 16, 8, 4, 2, 1W, 100V: 32, 16, 8, 4, 2W
•12-3/8" dia. x 12" D, 10 lb. •Vertical Clearance Requirement Minimum 11"
OCS1
70V HIGH-FIDELITY
NEAR ORBIT SPEAKERS
70V CEILING SUBWOOFER
•40 Hz-125 Hz Frequency Response (-6 dB) •Omni-
directional Dispersion •150W @ 8 ohms •70V Power Tap
Setting (in watts): 64, 32, 16, 8, 4, 2 •Minimum Vertical
Clearance: 11" (without Safety Cable Kit) 12-1/4" (when
using Safety Cable Kit) •15-1/2" dia. x 12-1/2" D, 20 lb.
CSUB
ACCESSORIES for CSUB
CK10: Suspension Safety Cable
7-1/4" SMALL- FOOTPRINT
•78 Hz-20 kHz Frequency Response •4" Polypropylene
cone with rubber surround LF Driver •3/4" Polycarbonate
dome HF Driver •150 degrees Dispersion •50W at 16
ohms •70V Power Tap Settings: 16, 8, 4, 2, 1 Watts
•7-1/4" Dia. × 7-1/2" D, 4.5 lb.
HFSF1
ACCESSORIES for HDFCS, FCS1LP, HFSF andOCS1
TBCR: Tile Bridge Support Ring
CK10: Suspension Safety Cable
70/ 25V/ 8 OHM
HANGING PENDANT SPEAKER
•5” polypropylene with rubber surround Woofer •½” Mylar
Tweeter •Frequency Range 95Hz to 20KHz •30 Watts RMS/ 60
Watts max. •40W, 30W, 15W, 7.5W, 5W, 2.5W, 1W, 0.5W,
0.25W & 8 Ohm Transformer Taps •8.25”W x 5.5”H, 5 lbs.
SP30PT/ White
SP30PTB/ Black
Hanging apparatus included
70V PENDANT SPEAKERS
70V PLASTIC ENCLOSURE
5.25”
•1” Mylar Tweeter •57Hz –20kHz •30 Watt RMS/ 60 Watt Max
•87 db 1w/1m •8 ohms •4.5 lbs. •30W, 15W, 7.5W, 5W, 2.5W, 1W,
.50W, .25W, & 8 Ohm taps •9.5” Dia x 6”Dia
SP-5MA/T
6.5”
•1” Mylar Tweeter •34Hz –20kHz •40 Watt RMS/ 80 Watt Max •88 db 1w/1m •5.5 lbs.
•40W, 30W, 15W, 7.5W, 5W, 2.5W, 1W, .50W, .25W & 8 Ohm taps •11” Dia x 7.5” Dia
SP-6MA/T: 6.5”
70V METAL ENCLOSURE NEXUS
™
UL
®
CONTRACTOR SERIES
6.5”
•6.5” Polypropylene Woofer w/Rubber Surround •¾” Silk Dome
Tweeter •Frequency Response: 60Hz to 20kHz •Max power: 80W
•Transformer settings: 30W, 15W, 7.5W, 3.7W & 1.9W or 8 Ohms
•10.25” Dia. x 7.75” Depth •Cut Out Dimensions: 8.75”
SP6NXCTUL
5.25”
Same as SP6NXCTUL, but with: 5.25” woofer •Transformer Settings: 10W, 5W, 2.5W,
1.25W & 0.625W •9.25”Dia x 7.25”Depth •Hole Cutout: 7.8” Dia
SP5NXCTUL
Bogen’s EASY INSTALL speaker can be completely installed -
mounted in the ceiling, secured, and connected -
in less than a minute!
CS1EZ: 1 Watt with Volume Control
SM1EZ: 1 Watt Single Tap Version
SM4T: 4 Watt Multi-Tap Version
SMTB: Tile Bridge for SM1EZ & SM4T
(Multiples of 5)
WB1EZ: 1W Wall Baffle with Volume Control
EASY INSTALL SPEAKERS
No-Tool Installation! No more cutting holes in ceiling tiles!
•Extremely good off-axis response
•Computer-matched venting system for
full bass output •High power handling
capability for foreground sound •Selec-
table power taps via front-mounted control
•16-ohm input for non-transformer
multi-speaker systems •Power Settings (in watts) 70V: 32, 16, 8, 4,2, 1 100V:
32, 16, 8, 4 •Connector provides loop-through to next speaker •Easy to use
cable suspension system that includes three suspension cables with attached
forged eyebolts •Low-resonance cabinet structure •White or black textured fin-
ish easily painted to match theme decors •Accessory 10-foot long cable kit for
use as main drop cable or safety cable Cable Kit (CK10 )
OPS1W: WHITE OPS1B: BLACK
MINI PENDANT SPEAKER
•Wide dispersion 4-1/2" driver & integral high
frequency radiator provide for broad, even coverage;
superb off-axis response •Computer-matched venting
system for extended bass output • Selectable power
taps via rear-mounted control; 32, 16, 8, 4, 2, 1 watts
@ 70V • 16-ohm @ 50W setting for non-transformer
multispeaker systems •Freq. Response: 50 Hz-14 kHz
•10-foot long cable kit for use as main drop cable or
safety cable available (Optional Accessory: CK10,
CK10W (White), or CK10B(Black)
MPS1B: Black MPS1W: White
COMPACT CEILING SPEAKER
The Bogen SEC4T Compact Ceiling Speaker is a
small footprint speaker that is designed to be easily
installed in ceiling tiles. The only tools needed are
those to cut the mounting hole. No tools are
required for wiring nor to secure the speaker.
•4" Wide range speaker •For 25V and 70V systems
•4, 2, 1, 1/2, 1/4, 1/8 Watt power taps •Bright White
Enamel over Steel Grille •Spring-loaded clamps for
easy, secure installation •Tile Bridge available (optional accessory TBSF...$7.50)
SEC4T
ORBIT PENDANT SPEAKER
NEW
COMMERCIAL SOUND
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
42
SPEAKERS
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:57 AM Page 42