Operating instructions

400 WATTS
•320W LF + 80W HF power amplifiers (peak) •Custom-designed,
heavy-duty, 12”/15” long throw low frequency drivers provide en-
hanced bass response •1.34” titanium diaphragm compression
driver with 1” throat for smooth high-end reproduction
•30- and 45- degree monitor angles for near and far field coverage
Auro D412: 12” BASS TRANSDUCER
•Freq. Response: 58Hz-20kHz •14”L X 10.8”W X 21.5”H, 35.8 lbs
Auro D415: 15” BASS TRANSDUCER
•Freq. Response: 55Hz-20kHz •17.75”L X 13.5”W X 27.5”H, 49 lbs
2-WAY ACTIVE SPEAKER SYSTEMS
500 WATTS RMS and
1000 WATTS PEAK of
CLASS D POWER
•18-inch low frequency transducer with robust 3-inch
voice coil •Fixed frequency (126 Hz, 24 dB/octave)
electronic crossover •Balanced XLR stereo input
•Balanced XLR stereo full range and high-pass outputs •Power, Signal and Peak LED
displays •Normal/ Invert phase level control •Large metal grab handles and a 35mm
pole mount receptacle •Solid 3/4-inch plywood construction with textured finish
AURO D1800
AURO D1200: 700 WATT, 12”
ACTIVE SUBWOOFER
200 WATT
•150W LF + 50W HF power amplifiers (peak) •Custom-designed,
heavy-duty, 8”/10” long throw low frequency drivers provide en-
hanced bass response •1” high frequency driver with 1” throat for
smooth high-end reproduction •35° monitor angle for the D208
and 45° degree monitor angle for the D210
Auro D208: 8” BASS TRANSDUCER
•Freq. Response: 64Hz-20kHz •9.8”L X 8”W X 14.7”H, 14.7lbs
Auro D210: 10” BASS TRANSDUCER
•Freq. Response: 60Hz-20kHz •11.5”L X 9.6”W X 18.3”H, 18.8lbs
COMMON FEATURES: Ultra-wide, flat frequency response •Balanced Mic/Line input
with Volume control and Peak LED •Two-band LF and HF shelving equalizer •XLR
Line Output connectors to “daisy-chain” multiple Auro cabinets •Multi-band dynam-
ics processing with audibly transparent limiting •Internal 24 dB/octave time aligned
electronic crossover •Standard 1 3/8-inch (35mm) speaker stand receptacle •Ver-
satile, portable design with integrated side handles •Tuned, ported bass reflex design
for extended low end •Rugged, lightweight polypropylene cabinet construction
100-WATT, 2-WAY, 8- OHM
6" LOW-FREQUENCY and
1" HIGH-FREQUENCY TRANSDUCERS
•120-Watt 6" low-frequency transducer provides deep bass for
small to medium sized rooms •Constant directivity 90° H x 70°
V rotatable waveguide with 1" high-frequency transducer •Fre-
quency Range (-10db): 62Hz-20kHz •17.7H X 10.2”W X 11.3”D
CL106 (Black)/ (White)
70V/100V
Same as Eurocom CL106, but with: 5-position terminal strip
provides amplifier connection to internal 100-Watt 70/100 V
transformer •70V Settings: 100W, 50W, 25W, 12.5W; 100V
Settings: 100W, 50W, 25W
CL106T (Black)/ (White)
150-WATT, 2-WAY, 8- OHM
8" LOW-FREQUENCY
and 1" HIGH-FREQUENCY TRANSDUCERS
•150-Watt 8" low-frequency transducer provides deep bass for
small to medium sized rooms •Constant directivity 90° H x 70°
V rotatable waveguide with 1" high-frequency transducer •Fre-
quency Range (-10db): 53Hz-20kHz •19.3H X 10.2”W X 11.3”D
CL108 (Black)/ (White)
70V/ 100V VERSION
Same as Eurocom CL108, but with: 5-position terminal strip
provides amplifier connection to internal 100-Watt 70/100 V
transformer •70V Settings: 100W, 50W, 25W, 12.5W; 100V
Settings: 100W, 50W, 25W
CL108T (Black)/ (White)
200-WATT, 2-WAY, 4- OHM
•6" LOW-FREQUENCY
and 1" HIGH-FREQUENCY TRANSDUCERS
•Dual 120-Watt 6" low-frequency transducers provide deep
bass for small to medium sized rooms •Constant directivity 90°
H x 70° V rotatable waveguide with 1" high-frequency trans-
ducer •Frequency Range (-10db): 57Hz-20kHz •17.7H X
10.2”W X 11.3”D
CL206 (Black)/ (White)
70V/ 100V VERSION
Same as Eurocom CL108, but with: 5-position terminal strip
provides amplifier connection to internal 100-Watt 70/100 V
transformer •70V Settings: 200W, 100W, 50W, 25W; 100V Set-
tings: 200W, 100W, 50W
CL206T (Black)/ (White)
200-WATT, 2-WAY, 4- OHM
•8" LOW-FREQUENCY
and 1.35" HIGH-FREQUENCY TRANSDUCERS
•Dual 150-Watt 8" low-frequency transducers provide deep
bass for small to medium sized rooms •Constant directivity
90°H x 70°V rotatable waveguide with 1.35" high-frequency
transducer •Frequency Range(-10db): 49Hz-20kHz
•28.4”Hx10.2”W x11.9”D
CL208 (Black)/ (White)
70V/100V VERSION
Same as Eurocom CL208, but with: 5-position terminal strip
provides amplifier connection to internal 200-Watt 70/100 V
transformer •70V Settings: 200W, 100W, 50W, 25W; 100V Set-
tings: 200W, 100W, 50W
CL208T (Black)/ (White)
ULTRA-COMPACT LOUDSPEAKER SYSTEMS
•Passive crossover with overload circuitry ensures optimal driver
protection •Professional speaker connector (compatible with Neutrik
Speakon connectors) and 4-position terminal strip •Internally braced and acoustically
inert 15° trapezoidal birch plywood enclosure ideal for cluster applications •Multiple
threaded inserts for flexible installation including OmniMount bolt pattern; includes
matching yoke bracket •Powder coated steel grille wrapped with acoustically trans-
parent fabric and foam matching black cabinet color
TRAPEZOIDAL
LOUDSPEAKERS
•Molded polypropylene construction •Heavy
gauge steel grilles with powder-coated
finish•Ferrofluid®-cooled and damped, high-out-
put aluminum alloy compression drivers
•Smooth, precise passive crossover •Versatile
mounting abilities with an integral tripod mount,
attachment points for fly-rigging and stacking speakers directly on one another with
top-side sockets to receive speaker feet •Lightweight, with integral carrying handle
•Dual Speakon
TM
connectors for input and loop-through
AMT-12: 200 WATT
•12” Woofer; 45mm Compression Driver •60Hz-20kHz •96dB (1W@1m)
•60º Horiz., 45º Vert. Dispersion •2-1/8”Hx16-1/4”Wx13-1/8”D, 37lb.
AMT-15:
300 WATT
•15” Woofer; 45mm Compression Driver •50Hz-20kHz •96dB (1W@1m)
•60º Horiz., 45º Vert. Dispersion •27”Hx19”Wx15”D, 47lb.
EUROCOM
EUROCOM
EUROCOM
EUROCOM
COMMERCIAL SOUND
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
46
SPEAKERS
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:57 AM Page 46