Operating instructions

19" Open frame equipment and headend racks
from VMP are the solution to equipment and
data cable management challenges that in-
stallers are confronted with regularly. Focused
on ease of assembly, functionality, safety and
compatibility, each of our racks insure that in-
stallers have the solutions they need to address
all of their low voltage requirements.
19” HEADEND
EQUIPMENT RACKS
•EIA compliant •Standard 10-32 threading
•Includes 32 rack screws •Black powder coat
UNIVERSAL RACK SHELVES
•Fits all components up to 17.375” wide •2 space racking height
•Tray depth- 12” •Load capacity - 50lbs. •Black powder coat finish
ER-S1: 12” TRAY DEPTH
ER-S1V: 12” TRAY DEPTH- VENTED
ER-S2U: 14.75” TRAY DEPTH
ER-S2UV: 14.75” TRAY DEPTH- VENTED
VENTED 2 SPACE CENTER MOUNT RACK SHELF
ER-S2CM: 19” TRAY DEPTH
ER-SS1U:
RACK MOUNTED SLIDING SHELF
Retracts flush when not in use •Maximum extension:13.8” •Tray dimension:
16.3” W x 13.8” D x 1.75” H (1 RU) •Load capacity: 35 lbs •Includes 10-32
and 12-24 mounting screws •Black static resistant powder coat finish
VMP-VWS:
VENTED WALL SHELF
•17”Hx20.5”Wx17”D •Wall or backboard mount •Convenient Quick-Slide As-
sembly •5 Cable supply locations •Black Static Resistant Powder Coat Finish
•200 lb. weight capacity
HINGED WALL BRACKETS
•Provides easy access to the back of panels •Right or left hand opening •Depth
4" •Includes 10-32 and 12-24 rack screws •Black static resistant powder coat
finish
ER-HWB1 1 space
ER-HWB2 2 space
D-RING CABLE MANAGER
•Large slotted metal rings manage all types and sizes of wire and cable •easy
to install on equipment racks/easy to assemble •Includes 10–32 and 12–24
rack screws •Black static resistant powder coat finish
ER-DRCM1: 1 space
ER-DRCM2: 2 space
LCD MONITOR RACK MOUNTS
•Accommodates monitors with 75 & 100 mm VESA standards •Holds most
10" to 17" monitors / inverts to also hold up to 23" monitors •Recesses moni-
tor into rack / 9 space racking height •Load capacity –50lbs /black static re-
sistant powder coat finish
ER-LCD1017
RACK FILLER
ER-4B: Four space (7") rack filter
ER-8B: Eight space (14") rack filter
RACK SCREWS
ER-RS1032-50
•0.75" long with 10-32 threads •Classic Phillips trim head / includes nylon
washers •Heat treated to resist stripping
ER-RS1032-100
same as above except 100 per package
VMP EQUIPMENT RACK ACCESSORIES
ER-S1
ER-S2U
ER-S2CM
ER-HWB1
ER-DRCM1
ER-LCD1017
ER-8SS1U
ER-4B
ER-RS1032
VMP-VWS
EREN-18
18U with (3) ER-S2UV Shelves &
(3) ER-2B Space Blanks
EREN-18E
18U without ER-S2UV Shelves and
ER2B Space Blanks
EREN-27
27U with (5) ER-S2UV Shelves &
(5) ER-2B Space Blanks
EREN-27E
27U without ER-S2UV Shelves and
ER2B Space Blanks
EREN-42E
42U except without Shelves and
Space Blanks
Samson's rugged
equipment racks are
solid steel and feature
fully enclosed steel
side panels. They are
available in four sizes
and are set upon
4 heavy-duty, 3-inch
(75 mm) casters with
locking fronts.
Each Samson
equipment rack
includes a single
space, flanged blank
panel and features a
unique steel support
bar construction allowing rack assemblies of
either European or US thread sizes.
SRK8: 8RU
SRK12: 12RU
SRK16: 16RU
SRK21: 21RU
19” UNIVERSAL RACK STANDS
19” EQUIPMENT RACK ENCLOSURES
•Works with all standard 19" rack equipment and accessories
•Rails threaded with standard 10-32 threading •Tempered glass
front door/ Double swing steel rear door •Adjustable front and rear rails/ Vented
top and bottom •Pre-installed cooling fans •Top and bottom cable routing
knockouts •Reversible hinged front and rear door •Removable side panels
(with optional locks) •Casters and leveling feet •Welded steel construction
•Ships assembled/ Black powder coat finish •Load capacity- 1,000 lbs
ERWEN-12E
12U Wall Equipment Rack without
Shelves and Space Blanks,
Load Capacity 120lbs
ERWEN-15E
15U Wall Equipment Rack without
Shelves and Space Blanks,
Load Capacity 120lbs
ACCESSORIES
ERENCASTERS
Heavy Duty Floor Cabinet Casters
EREN2FANKIT
2 Fan Panel for Floor Cabinets
EREN3FANKIT
3 Fan Panel for Floor Cabinets
VMP
VMP
71” HEIGHT
•Mounts up to 40 devices
ER-1
48” HEIGHT
•Mounts up to 27 devices
ER-148
84” HEIGHT
•Mounts up to 45 devices
ER-184
CASTERS/ SET OF 4
19” ALUMINUM
OPEN FRAME RACKS
•Self Squaring Design •EIA compliant •Standard
10-32 threading •Includes 32 rack screws
•Black powder coat finish
72” HEIGHT
•38 Rack Spaces
ER-72
84” HEIGHT
•45 Rack Spaces
ER-84
19” WALL MOUNTED-
SWING GATE,
RACK- 24” HEIGHT
•EIA compliant •Easy lift on/ off wall mount plate
•13 Rack spaces •Standard 10-32 threading •Us-
able depth- 19” •Steel and aluminum construc-
tion •Black powder coat finish
ERW-24
EREN-42E
EREN-27
EREN-18
EREN-12E
NEW
INSTALLATION ACCESSORIES
57
202 NEW HIGHWAY, PO BOX 667, AMITYVILLE, NEW YORK 11701-0667
[phone] • FAX: [phone] • E-MAIL: [e-mail]
1-800-645-5833 • FAX ORDERS ONLY: 1-800-RNJ-FAX1
EQUIPMENT RACKS
BACK TO INDEX
2014 RNJ CATALOG w/o Pricing:Layout 1 3/4/14 8:58 AM Page 57