User manual

Page 129
PPC-5170GS Flat Panel PC
 Init. Graphic Adapter Priority [PCI/Int-VGA]
The Init. Graphic Adapter Priority option selects the graphics controller the system uses as
a primary boot device. The options are:
223 Internal VGA
224 PCI/Int-VGA D
EFAULT
 Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory that
can be used by the Internal graphics device.

Disable

Enable, 1MB
1MB of memory used by internal graphics device

Enable, 4MB
4MB of memory used by internal graphics device

Enable, 8MB DEFAULT
8MB of memory used by internal graphics device

Enable, 16MB
16MB of memory used by internal graphics device

Enable, 32MB
32MB of memory used by internal graphics device
 Graphics Aperture Size [64MB]
The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is a
portion of the PCI memory address range dedicated as graphics memory address space.

64MB DEFAULT
Graphics aperture size set as 64MB

128MB
Graphics aperture size set as 128MB