User manual

Page 58
IEI
®
Technology, Corp.
PPC-5170GS Flat Panel PC
3.7 Mounting the System
WARNING!
When mounting the PPC-5170 flat panel PC onto an arm, wall or into a
panel, it is advisable to have more than one person help with the
installation to prevent accidental damage to the panel and avoid personal
injury.
The four methods of mounting the PPC-5170 are:
125 Wall mounting
126 Panel mounting
127 Arm mounting
128 Rack mounting
The four mounting methods are fully described below.
3.7.1 Wall Mounting
To mount the PPC-5170 flat panel PC onto a wall, please follow the steps below.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Select the location on the wall for the wall-mounting bracket.
Carefully mark the locations of the four bracket screw holes on the wall.
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Align the wall-mounting bracket screw holes with the pilot holes.
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (see Figure 3-11).