User manual

Page 61
PPC-5170GS Flat Panel PC
Figure 3-13: Secure the Chassis
3.7.2 Panel Mounting
To mount the PPC-5170 flat panel PC into a panel, please follow the steps below.
NOTE:
The maximum panel thickness should be no more than 6mm.
Step 1:
Step 2:
Select the position on the panel to mount the PPC-5170.
Cut out a section of the panel that corresponds to the rear panel dimensions of
the PPC-5170. Take care that the panel section that is cut out is smaller than the
overall size of the metal frame that surrounds the PPC-5170 but just large
enough for the rear panel of the PPC-5170 to fit through (Figure 3-14).