User manual

Page 64
IEI
®
Technology, Corp.
PPC-5170GS Flat Panel PC
PPC-5170 flat panel PC. The PPC-5170 flat panel PC arm mount retention
screw holes are shown in Figure 3-17.
Figure 3-17: Arm Mount Retention Screw Holes
Step 4:
Step 1:
Step 2:
Secure the PPC-5170 to the interface pad by inserting four retention screws
through the mounting arm interface pad and into the PPC-5170 flat panel PC.
Step 0:
3.7.4 Cabinet and Rack Installation
The PPC-5170 flat panel PC can be installed into a cabinet or rack. To do this, please
follow the steps below.
The back of the metal frame surrounding the PPC-5170 flat panel PC has
several retention screw holes for a cabinet/rack installation bracket.
NOTE:
When purchasing a cabinet/rack installation bracket, make sure it is
compatible with both the PPC-5170 flat panel PC and the cabinet/rack into
which the PPC-5170 flat panel PC is installed.
Slide the PPC-5170 through the cabinet/rack bracket until the rear side of the
PPC-5170 frame is flush against the front of the bracket.