User manual

Page 66
IEI
®
Technology, Corp.
PPC-5170GS Flat Panel PC
Figure 3-19: Install into a Rack/Cabinet
Step 6: Once the PPC-5170 flat panel PC with the attached rack/cabinet bracket has
been properly inserted into the rack/cabinet, secure the front of the rack/cabinet
bracket to the front of the rack/cabinet (Figure 3-19). Step 0:
3.8 External Peripheral Interface Connectors
3.8.1 LCD Panel Connection
A conventional CRT VGA 15-pin female D-SUB connector is located on the bottom panel
to connect the PPC-5170 flat panel PC to a second monitor.
NOTE:
To use the dual screen option, please configure this option in the Intel® Extreme
Graphics configuration settings. To do this, open the Control Panel, locate the
Intel® Extreme Graphics icon and click on it. Once opened, an option for Multiple
Display is available. Select this option and select notebook as the primary device.