User manual

Page 83
PPC-5170GS Flat Panel PC
Key Function
F2 /F3 key Change color from total 16 colors. F2 to select color
forward.
F10 key Save all the CMOS changes, only for Main Menu
Table 5-1: BIOS Navigation Keys
5.1.3 Getting Help
When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
SC or
the F1 key again.
5.1.4 Unable to Reboot After Configuration Changes
If the computer cannot boot after changes are made to the system configuration, use the
jumper described in Section 0 to reset the CMOS defaults.
5.1.5 BIOS Menu Bar
The menu bar on top of the BIOS screen has the following main items:
133
Main Changes the basic system configuration.
134
Advanced Changes the advanced system settings.
135PCIPnP Changes the advanced PCI/PnP Settings
136 Boot Changes the system boot configuration.
137 Security Sets User and Supervisor Passwords.
138 Chipset Changes the chipset settings.
139 Power Changes power management settings.
140 Exit Selects exit options and loads default settings
The following sections completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.